EUVIMEDEUVIMED entdecken
Crossref

Genetic Algorithm-Based Inverse Design of Slotted Disc Springs Through Load–Displacement Matching

Noor Fawazi Md Noor Rudin, Roslina Mohammad, Muhammed Amirul Asyraf Hasnan, Muhammad Noor Afiq Witri Muhammad Yazid, Jung Youn Lee

Semarak Engineering Journal · 09.09.2026 · 16 (1) · 1-15

DOI: 10.37934/sej.16.1.115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Semarak Engineering Journal, online erschienen am 09.09.2026. Verfasst von Noor Fawazi Md Noor Rudin und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The load–displacement characteristic is a primary design requirement for a slotted disc spring, but the geometry that produces a prescribed nonlinear response is often unknown. This study couples Schremmer’s analytical formulation with a Genetic Algorithm (GA) that minimizes the least mean square (LMS) curve error. The outer diameter was fixed at 152.40 mm to preserve the benchmark installation, while the tongue width and 12-slot topology were retained to isolate the continuous inverse problem. A one-factor-at-a-time analysis ranked the normalized sensitivities as transition diameter (approximately 8.35), thickness (1.69), inner diameter (1.47), slot length (0.76), and cone height (0.67); the indices for slot count, tongue width, and slot width were below 0.05. Because slot length is dependent, transition diameter, inner diameter, thickness, and cone height were optimized. The GA achieved LMS = 0.017, compared with 43.677 for the earlier inverse method. The four optimized dimensions differed from their targets by approximately 0.78%, 4.00%, 1.06%, and 1.18%, respectively. This result verifies computational recovery within the shared analytical benchmark only; no finite element or experimental validation was performed. The method is therefore a preliminary screening tool, and finite element verification, manufacturability assessment, and prototype testing are required before engineering implementation.

Zitieren

APA

Rudin, N. F. M. N., Mohammad, R., Hasnan, M. A. A., Yazid, M. N. A. W. M., & Lee, J. Y. (2026). Genetic Algorithm-Based Inverse Design of Slotted Disc Springs Through Load–Displacement Matching. Semarak Engineering Journal, 16(1), 1-15. https://doi.org/10.37934/sej.16.1.115

Vancouver

Rudin NFMN, Mohammad R, Hasnan MAA, Yazid MNAWM, Lee JY. Genetic Algorithm-Based Inverse Design of Slotted Disc Springs Through Load–Displacement Matching. Semarak Engineering Journal. 2026;16(1):1-15. doi:10.37934/sej.16.1.115

BibTeX
@article{Rudin2026,
  author = {Rudin, Noor Fawazi Md Noor and Mohammad, Roslina and Hasnan, Muhammed Amirul Asyraf and Yazid, Muhammad Noor Afiq Witri Muhammad and Lee, Jung Youn},
  title = {Genetic Algorithm-Based Inverse Design of Slotted Disc Springs Through Load–Displacement Matching},
  journal = {Semarak Engineering Journal},
  year = {2026},
  volume = {16},
  number = {1},
  pages = {1--15},
  doi = {10.37934/sej.16.1.115}
}
Kostenlos starten →