EUVIMEDEUVIMED entdecken
Crossref

FDM Printed PLA/Coconut Wood Composite: Compression Characteristics and Parametric Optimization

Mahendran Samykano, Rajan Kumaresan, Reji Kumar Rajamony, Muhamad Mat Noor, Kumaran Kadirgama, Devarajan Ramasamy, Wan Sharuzi Wan Harun, Adarsh Kumar Pandey, Avinash Maruti Badadhe, Satesh Namasivayam

Journal of Advanced Research in Micro and Nano Engineering · 31.12.2024 · 28 (1) · 30-46

DOI: 10.37934/armne.28.1.3046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Research in Micro and Nano Engineering, online erschienen am 31.12.2024. Verfasst von Mahendran Samykano und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused Deposition Modelling (FDM) is a cost-effective technique within the realm of Additive Manufacturing (AM) that enables the fabrication of three-dimensional objects using thermoplastic and composite materials. FDM can generate complex parts with precise dimensions, which has helped the manufacturing industry. The biomedical industry uses wood particles; however, pure wood's mechanical properties are unknown. Coconut wood is biodegradable, heat and corrosion-resistant. The present study analyses the physical characteristics shown by Polylactic acid (PLA) and a tailored PLA/Ct.W composite. The compression properties of PLA and PLA/Ct.W specimens were investigated in accordance with ASTM standards (ASTM D695). Testing specimens were constructed using the FDM technique on PLA and PLA/Ct. W composite with different infill percentages (75%, 50% and 25%) and patterns (honeycomb, grid, concentric, rectilinear and octagram spiral). After that, the RSM is utilized to discover the parameter that has the largest effect on mechanical properties. Experimental results show that grid infill patterns with 75% infill percentages have the best compression properties. The weakest infill pattern is the octagram spiral. The RSM was employed to generate regression equations to optimize the properties of the PLA/Ct.W composite. It is suggested that the utilization of bonding agents can effectively augment the bonding between PLA and Coconut wood materials. Additionally, reducing the particle size of the coconut wood can further improve the overall quality of the product.

Zitieren

APA

Samykano, M., Kumaresan, R., Rajamony, R. K., Noor, M. M., Kadirgama, K., Ramasamy, D., Harun, W. S. W., Pandey, A. K., Badadhe, A. M., & Namasivayam, S. (2024). FDM Printed PLA/Coconut Wood Composite: Compression Characteristics and Parametric Optimization. Journal of Advanced Research in Micro and Nano Engineering, 28(1), 30-46. https://doi.org/10.37934/armne.28.1.3046

Vancouver

Samykano M, Kumaresan R, Rajamony RK, Noor MM, Kadirgama K, Ramasamy D, et al. FDM Printed PLA/Coconut Wood Composite: Compression Characteristics and Parametric Optimization. Journal of Advanced Research in Micro and Nano Engineering. 2024;28(1):30-46. doi:10.37934/armne.28.1.3046

BibTeX
@article{Samykano2024,
  author = {Samykano, Mahendran and Kumaresan, Rajan and Rajamony, Reji Kumar and Noor, Muhamad Mat and Kadirgama, Kumaran and Ramasamy, Devarajan and Harun, Wan Sharuzi Wan and Pandey, Adarsh Kumar and Badadhe, Avinash Maruti and Namasivayam, Satesh},
  title = {FDM Printed PLA/Coconut Wood Composite: Compression Characteristics and Parametric Optimization},
  journal = {Journal of Advanced Research in Micro and Nano Engineering},
  year = {2024},
  volume = {28},
  number = {1},
  pages = {30--46},
  doi = {10.37934/armne.28.1.3046}
}
Kostenlos starten →