EUVIMEDEUVIMED entdecken
Crossref

The Impact of Heating Temperature and Flux Ratio on the In-Situ Casting Technique as a Direct Recycling of AlSi7Mg Machining Chips

Ain Zubaidah Samian, Aslinda Saleh, Nazreen James Nazri, Norfazillah Talib, Haslina Abdullah, Woon Kiow Lee

Journal of Advanced Research in Micro and Nano Engieering · 2024

DOI: 10.37934/armne.15.1.3140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Research in Micro and Nano Engieering, 2024. Verfasst von Ain Zubaidah Samian und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling aluminium and its alloys is gaining popularity in reducing energy consumption and associated manufacturing expenses. The fluxing process is the preferred and often-used technique in the recycling sector for removing oxide inclusions from molten aluminium. The present study investigates the influence of flux ratio and heating temperature on the behaviour of aluminium alloy chips (AlSi7Mg) during in-situ casting. The primary objective is to create a more efficient and economical approach to recycling aluminium waste. The chips underwent heating for 30 minutes inside a controlled laboratory furnace. The temperatures used during this procedure were 750°C and 800°C. The chips were combined with flux in ratios of 1:0.1 and 1:0.2. The number of melted chips rose due to increasing the temperature and flux ratio. The heated samples were subjected to surface morphology and elemental analysis using a scanning electron microscope with energy-dispersive spectroscopy (EDS). The Energy Dispersive Spectroscopy (EDS) examination indicated the presence of oxygen on the surface of the unprocessed aluminium alloy machining chips. On the other hand, the X-ray diffraction (XRD) revealed that the observed condition may be attributed to the oxidation process, proven by the presence of Aluminium Oxide (Al2O3).

Zitieren

APA

Samian, A. Z., Saleh, A., Nazri, N. J., Talib, N., Abdullah, H., & Lee, W. K. (2024). The Impact of Heating Temperature and Flux Ratio on the In-Situ Casting Technique as a Direct Recycling of AlSi7Mg Machining Chips. Journal of Advanced Research in Micro and Nano Engieering. https://doi.org/10.37934/armne.15.1.3140

Vancouver

Samian AZ, Saleh A, Nazri NJ, Talib N, Abdullah H, Lee WK. The Impact of Heating Temperature and Flux Ratio on the In-Situ Casting Technique as a Direct Recycling of AlSi7Mg Machining Chips. Journal of Advanced Research in Micro and Nano Engieering. 2024. doi:10.37934/armne.15.1.3140

BibTeX
@article{Samian2024,
  author = {Samian, Ain Zubaidah and Saleh, Aslinda and Nazri, Nazreen James and Talib, Norfazillah and Abdullah, Haslina and Lee, Woon Kiow},
  title = {The Impact of Heating Temperature and Flux Ratio on the In-Situ Casting Technique as a Direct Recycling of AlSi7Mg Machining Chips},
  journal = {Journal of Advanced Research in Micro and Nano Engieering},
  year = {2024},
  doi = {10.37934/armne.15.1.3140}
}
Kostenlos starten →