EUVIMEDEUVIMED entdecken
Crossref

Influence of Molybdenum Disulphide (MoS2) Nanoparticles Loading in Treated Used Palm Oil Bio-lubricant on Surface Roughness during Turning of AISI420

Muhamad Azwar Azhari, Nor Hasrul Akhmal Ngadiman, Noordin Mohd Yusof, Ani Idris, Norazlianie Sazali

Journal of Advanced Research in Micro and Nano Engieering · 2024

DOI: 10.37934/armne.14.1.17 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Research in Micro and Nano Engieering, 2024. Verfasst von Muhamad Azwar Azhari und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The environmental impact and non-biodegradability of petroleum-based lubricants has caused some researchers to shift the formulation of lubricant formulation using plant-based oil, However, food security has caused concerns in development of new bio-lubricants. In this study, treated used cooking palm oil added with Zinc Dialkyldithiophosphate and Molybdenum Disulphide nanoparticles were used as lubricant to assist the cutting of hardened martensitic stainless steel AISI420 using coated carbide tool. Surface roughness of the cut workpiece was investigated using a surface roughness tester. From the study, treated used cooking oil added with ZDDP and 0.8wt% MoS2 nanoparticles displayed the lowest average surface roughness of workpiece with Ra = 0.532µm and total roughness Rz = 4.006µm. This concluded that the new formulated bio-lubricant can successfully replace the readily available commercial cutting fluid as it produces a low surface roughness during cutting process.

Zitieren

APA

Azhari, M. A., Ngadiman, N. H. A., Yusof, N. M., Idris, A., & Sazali, N. (2024). Influence of Molybdenum Disulphide (MoS2) Nanoparticles Loading in Treated Used Palm Oil Bio-lubricant on Surface Roughness during Turning of AISI420. Journal of Advanced Research in Micro and Nano Engieering. https://doi.org/10.37934/armne.14.1.17

Vancouver

Azhari MA, Ngadiman NHA, Yusof NM, Idris A, Sazali N. Influence of Molybdenum Disulphide (MoS2) Nanoparticles Loading in Treated Used Palm Oil Bio-lubricant on Surface Roughness during Turning of AISI420. Journal of Advanced Research in Micro and Nano Engieering. 2024. doi:10.37934/armne.14.1.17

BibTeX
@article{Azhari2024,
  author = {Azhari, Muhamad Azwar and Ngadiman, Nor Hasrul Akhmal and Yusof, Noordin Mohd and Idris, Ani and Sazali, Norazlianie},
  title = {Influence of Molybdenum Disulphide (MoS2) Nanoparticles Loading in Treated Used Palm Oil Bio-lubricant on Surface Roughness during Turning of AISI420},
  journal = {Journal of Advanced Research in Micro and Nano Engieering},
  year = {2024},
  doi = {10.37934/armne.14.1.17}
}
Kostenlos starten →