Evaluation of Metal Printed Parts Fabricated using Robotic Wire Arc Additive Manufacturing with Open-Source Slicer
Journal of Advanced Research in Applied Mechanics · 10.07.2025 · 139 (1) · 136-147
DOI: 10.37934/aram.139.1.136147 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Advanced Research in Applied Mechanics, online erschienen am 10.07.2025. Verfasst von Nur Ayuni Ashyira Mohamad Yusri und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Wire arc additive manufacturing (WAAM) is a technology that is gaining recognition in fabricating small to large-scale and complex metal products. Despite having several advantages, WAAM still poses challenges especially in generating toolpath for robotic arms. Usually, existing solutions rely on expensive commercial software that compatible with robotic motion, making them less accessible for wider adoption. This paper proposes an open-source software solution to address this issue which focusing on pre-processing CAD data to generate toolpaths for WAAM systems. However, most of open-source software was developed purposedly for polymer material and compatible with 3D printing or mechanism motion after modified the open-source g-code. Therefore, the study was carried to evaluate effectiveness in generating toolpaths for robotics arm on metallic structures. The part was fabricated using an arc-welding robot integrated with a cold metal transfer (CMT) welding torch. The study covers the generation of continuous and discontinuous toolpaths, conversion files to robot specific programs, the placement of the parts, and the WAAM process. The result reports the successful fabrication of complex parts as well as deviations from the CAD data.
Zitieren
APA
Yusri, N. A. A. M., Alkahari, M. R., Rosli, N. A., Osman, M. H., Abdullah, A., Neo, T. S., & Herawan, S. G. (2025). Evaluation of Metal Printed Parts Fabricated using Robotic Wire Arc Additive Manufacturing with Open-Source Slicer. Journal of Advanced Research in Applied Mechanics, 139(1), 136-147. https://doi.org/10.37934/aram.139.1.136147
Vancouver
Yusri NAAM, Alkahari MR, Rosli NA, Osman MH, Abdullah A, Neo TS, et al. Evaluation of Metal Printed Parts Fabricated using Robotic Wire Arc Additive Manufacturing with Open-Source Slicer. Journal of Advanced Research in Applied Mechanics. 2025;139(1):136-147. doi:10.37934/aram.139.1.136147
BibTeX
@article{Yusri2025,
author = {Yusri, Nur Ayuni Ashyira Mohamad and Alkahari, Mohd Rizal and Rosli, Nor Ana and Osman, Mohd Hairizal and Abdullah, Abu and Neo, Teck Siong and Herawan, Safarudin Gazali},
title = {Evaluation of Metal Printed Parts Fabricated using Robotic Wire Arc Additive Manufacturing with Open-Source Slicer},
journal = {Journal of Advanced Research in Applied Mechanics},
year = {2025},
volume = {139},
number = {1},
pages = {136--147},
doi = {10.37934/aram.139.1.136147}
}
EUVIMED