EUVIMEDEUVIMED entdecken
Crossref

Quantifying the Impact of Drilling Parameters on Temperature Elevation within Bone during the Process of Implant Site Preparation

Md Ashequl Islam, Nur Saifullah Kamarrudin, Ruslizam Daud, Ishak Ibrahim, Shahriman Abu Bakar, Siti Noor Fazliah Mohd Noor

Journal of Advanced Research in Applied Mechanics · 05.05.2024 · 116 (1) · 1-12

DOI: 10.37934/aram.116.1.112 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Research in Applied Mechanics, online erschienen am 05.05.2024. Verfasst von Md Ashequl Islam und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to elucidate the influences of several drilling parameters on bone temperature during drilling, as excessive heat generation can cause thermal bone damage and affect post-surgery recovery. In vitro drilling tests were conducted on bovine femoral shaft cortical bone specimens. The parameters considered included tool rotational speed (s), feed rate (f), tool diameter (d), and drill tip angles of 118° and 135°. Drilling temperatures were studied across a range of 800–2000 rpm rotational speeds, 20–40 mm/min feed rates, and 2–4 mm drill diameters. A predictive statistical model was constructed using the response surface methodology (RSM). Analysis of variance (ANOVA) at a 95% confidence level (α = 0.05) revealed that rotational speed significantly impacted temperature increase, contributing to 59.74% of observed temperature rises. Drill diameter accounted for 16.21% of temperature variations, while feed rate contributed to 10.04% of the temperature rises. The study provides valuable insights into the predominant factors affecting bone temperature during drilling. Understanding these parameters and their interplay is pivotal for optimizing drilling conditions and minimizing potential thermal damage to bones.

Zitieren

APA

Islam, M. A., Kamarrudin, N. S., Daud, R., Ibrahim, I., Bakar, S. A., & Noor, S. N. F. M. (2024). Quantifying the Impact of Drilling Parameters on Temperature Elevation within Bone during the Process of Implant Site Preparation. Journal of Advanced Research in Applied Mechanics, 116(1), 1-12. https://doi.org/10.37934/aram.116.1.112

Vancouver

Islam MA, Kamarrudin NS, Daud R, Ibrahim I, Bakar SA, Noor SNFM. Quantifying the Impact of Drilling Parameters on Temperature Elevation within Bone during the Process of Implant Site Preparation. Journal of Advanced Research in Applied Mechanics. 2024;116(1):1-12. doi:10.37934/aram.116.1.112

BibTeX
@article{Islam2024,
  author = {Islam, Md Ashequl and Kamarrudin, Nur Saifullah and Daud, Ruslizam and Ibrahim, Ishak and Bakar, Shahriman Abu and Noor, Siti Noor Fazliah Mohd},
  title = {Quantifying the Impact of Drilling Parameters on Temperature Elevation within Bone during the Process of Implant Site Preparation},
  journal = {Journal of Advanced Research in Applied Mechanics},
  year = {2024},
  volume = {116},
  number = {1},
  pages = {1--12},
  doi = {10.37934/aram.116.1.112}
}
Kostenlos starten →