EUVIMEDEUVIMED entdecken
Crossref

Characterization of Carbon Fibre Reinforced Polyphenylene Sulfide Composite Under Interlaminar Shear Strength

Hasanudin Hamdan, Nadlene Razali, Anita Akmar Kamarolzaman, Nurfaizey Abdul Hamid, Siti Hajar Sheikh Md Fadzullah, Emy Aqillah Sharif, Syazwan Ahmad Rashidi, Sarah Othman

Journal of Advanced Research in Applied Mechanics · 2023

DOI: 10.37934/aram.102.1.19 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Research in Applied Mechanics, 2023. Verfasst von Hasanudin Hamdan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aerospace industry is seeking thermoplastic composites materials due to several advantages over thermoset material and one of them is mechanical properties. Mechanical properties of thermoplastic composite materials are found to be superior compared to thermoset materials. High strength fibre composites parts are made of several plies with different fibre orientation with a designed balanced of lay-up sequence. Interlaminar Shear Strength (ILSS) is an essential consideration when designing laminated structures exposed to transverse stresses. It is to predict quality and strength of laminate levels of composite due to, composite failure cannot be observed directly to the propagation of single macroscopic crack when subjected to cyclic loading. This test is employed to evaluate both the interfacial adhesion of the matrix and the influence of the reinforcement on the mechanical characteristics of the composite. This study provides the understanding of ILSS test of 2 different thickness for 6 and 8 plies Carbon Fibre Reinforced Polyphenylene Sulfide (CF/PPS) according to the testing standard EN 2563. The results show that 8 plies have higher ILSS properties compared to 6 plies. The fractography of the CF/PPS composite under Scanning Electron Microscope (SEM) shows good agreement with the experimental values which was recorded 8 plies can withstand to shear strength of 79 MPa with maximum load applied was 2.738kN while, 6 plies recorded 75 MPa on shear strength with load of 1.971kN. More damage/cracks on 6 plies specimen compared to 8 plies.

Zitieren

APA

Hamdan, H., Razali, N., Kamarolzaman, A. A., Hamid, N. A., Fadzullah, S. H. S. M., Sharif, E. A., Rashidi, S. A., & Othman, S. (2023). Characterization of Carbon Fibre Reinforced Polyphenylene Sulfide Composite Under Interlaminar Shear Strength. Journal of Advanced Research in Applied Mechanics. https://doi.org/10.37934/aram.102.1.19

Vancouver

Hamdan H, Razali N, Kamarolzaman AA, Hamid NA, Fadzullah SHSM, Sharif EA, et al. Characterization of Carbon Fibre Reinforced Polyphenylene Sulfide Composite Under Interlaminar Shear Strength. Journal of Advanced Research in Applied Mechanics. 2023. doi:10.37934/aram.102.1.19

BibTeX
@article{Hamdan2023,
  author = {Hamdan, Hasanudin and Razali, Nadlene and Kamarolzaman, Anita Akmar and Hamid, Nurfaizey Abdul and Fadzullah, Siti Hajar Sheikh Md and Sharif, Emy Aqillah and Rashidi, Syazwan Ahmad and Othman, Sarah},
  title = {Characterization of Carbon Fibre Reinforced Polyphenylene Sulfide Composite Under Interlaminar Shear Strength},
  journal = {Journal of Advanced Research in Applied Mechanics},
  year = {2023},
  doi = {10.37934/aram.102.1.19}
}
Kostenlos starten →