Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers
Journal of Visualized Experiments · 2025
DOI: 10.3791/67825 ↗Kurz gefasst
Video/Audio in der Zeitschrift Journal of Visualized Experiments, 2025. Verfasst von Shuvo Brahma und 8 weiteren Autor:innen. Beteiligte Einrichtung: Material Science, Engineering and Commercialization, Texas State University. Hauptthemen laut MEDLINE: Polymers, Nanofibers, Bridged Bicyclo Compounds, Heterocyclic, Acrylic Resins. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben.
Abstract (Originalsprache)
This study investigates the preparation of polyacrylonitrile (PAN) nanofibers through electrospinning to create highly porous and strong materials for applications in water purification, electrocatalysis, and biomedicine. The uniformly white PAN nanofiber mats were cut into 2 cm x 2 cm coupons to ensure consistency. After electrospinning, these nanofibers were coated with an electroactive polymer (EAP) using chemical vapor deposition, with iron (III) chloride (FeCl3) serving as an oxidant for polymerizing 3,4-ethylenedioxythiophene (EDOT) into poly(3,4-ethylenedioxythiophene) (PEDOT). The study examined the impact of different FeCl3 concentrations on PEDOT deposition on the PAN coupons. PEDOT deposition led to an increase in coupon weight. Scanning electron microscopy (SEM) revealed increases in the diameter of the nanofibers treated with increasing FeCl3 oxidant concentration, although higher FeCl3 concentrations caused inter-fiber bridging, implying a concomitant decrease in inter-fiber spacing. Energy dispersive X-ray spectroscopy (EDS) was used to confirm the presence of Fe, Cl, and S in the nanofibers, with sulfur content rising with FeCl3 concentration used, suggesting increased PEDOT deposition efficiency with increasing oxidant concentration. Mechanical testing showed that PEDOT-coated PAN fibers had improved tensile strength and toughness in the hydrated state compared to pure PAN nanofibers. These results highlight the crucial role of FeCl3 concentration in influencing the morphology and properties of PAN-PEDOT composites, enhancing their suitability for applications such as water purification, tissue engineering, biosensing, catalysis, and energy storage.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Material Science, Engineering and Commercialization, Texas State University.
- Department of Chemistry and Biochemistry, Texas State University; Chemical and Biological Engineering, University of Colorado Boulder.
- Department of Chemistry and Biochemistry, Texas State University.
- Chemical and Biological Engineering, University of Colorado Boulder.
- STAR Park, Texas State University.
- Material Science, Engineering and Commercialization, Texas State University; Department of Chemistry and Biochemistry, Texas State University; College of Science and Engineering, University of Houston-Clear Lake; irvinj…
Zitieren
APA
Brahma, S., Gustafson, A., Ur Rehman, J., Lontkowski, N. R., Libonati, A., Goss, M., Bay, R. K., Irvin, J. A., & Betancourt, T. (2025). Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers. Journal of Visualized Experiments. https://doi.org/10.3791/67825
Vancouver
Brahma S, Gustafson A, Ur Rehman J, Lontkowski NR, Libonati A, Goss M, et al. Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers. Journal of Visualized Experiments. 2025. doi:10.3791/67825
BibTeX
@article{Brahma2025,
author = {Brahma, Shuvo and Gustafson, Aidan and Ur Rehman, Junaid and Lontkowski, Nicholas R and Libonati, Alyssa and Goss, Marcus and Bay, R Kōnane and Irvin, Jennifer A and Betancourt, Tania},
title = {Vapor Phase Deposition of Electroactive Poly(3,4-ethylenedioxythiophene) onto Electrospun Commodity Polymer Nanofibers},
journal = {Journal of Visualized Experiments},
year = {2025},
doi = {10.3791/67825}
}
EUVIMED