EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design of Axial Flux Generator for Vertical Wind Turbine Power Plant

Adi Kurniawan Saputro, Riza Alfita, Oryza Sativa Nugroho, Achmad Fiqhi Ibadillah, Kunto Aji Wibisono

Jambura Journal of Electrical and Electronics Engineering · 20.07.2026 · 8 (2) · 110-118

DOI: 10.37905/jjeee.v8i2.34141 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jambura Journal of Electrical and Electronics Engineering, online erschienen am 20.07.2026. Verfasst von Adi Kurniawan Saputro und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research discusses the design and testing of an axial flux generator using neodymium iron boron (NdFeB) permanent magnets for use in vertical wind turbines at low wind speeds. The main objective of the research is to create a generator design that is compact, efficient, and can work well in low wind speed conditions. The development method begins with calculating the number of poles, coils, windings, and the maximum magnetic field. Next, 2D and 3D designs of the rotor and stator are made with a configuration of 6 pairs of poles or 12 magnets and 9 three-phase coils with a design capacity of 100 watts. After the design is completed, tests are carried out using resistor loads and various lamps to measure the generator's performance. The test results show that the generator is able to produce different efficiencies depending on the load and rotational speed. In the test using a resistor, the highest efficiency was achieved at 89.5% at a speed of 402.8 RPM, while in the test with a lamp load, the electrical efficiency reached 98.46% at a load of 1.5 watts at a speed of 1501 RPM. However, efficiency tends to decrease at higher loads due to increased copper losses in the windings. In conclusion, the designed axial flux generator is effective for use in vertical wind turbines at low speeds, although it still requires design improvements to maintain stable performance at high loads.

Zitieren

APA

Saputro, A. K., Alfita, R., Nugroho, O. S., Ibadillah, A. F., & Wibisono, K. A. (2026). Design of Axial Flux Generator for Vertical Wind Turbine Power Plant. Jambura Journal of Electrical and Electronics Engineering, 8(2), 110-118. https://doi.org/10.37905/jjeee.v8i2.34141

Vancouver

Saputro AK, Alfita R, Nugroho OS, Ibadillah AF, Wibisono KA. Design of Axial Flux Generator for Vertical Wind Turbine Power Plant. Jambura Journal of Electrical and Electronics Engineering. 2026;8(2):110-118. doi:10.37905/jjeee.v8i2.34141

BibTeX
@article{Saputro2026,
  author = {Saputro, Adi Kurniawan and Alfita, Riza and Nugroho, Oryza Sativa and Ibadillah, Achmad Fiqhi and Wibisono, Kunto Aji},
  title = {Design of Axial Flux Generator for Vertical Wind Turbine Power Plant},
  journal = {Jambura Journal of Electrical and Electronics Engineering},
  year = {2026},
  volume = {8},
  number = {2},
  pages = {110--118},
  doi = {10.37905/jjeee.v8i2.34141}
}
Kostenlos starten →