EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical investigation of kinetic-energy reduction and tip equivalent (von Mises) stress of an RPG surrogate inside a 3D-printed UAS fuselage under high-speed impact

Wyrlo Ricablanca, Paula Alexandra Padro, Ben James Cuajotor, Michael Ray Maligro, Hannah Marie Tulang, Alan Pierre-Miguel Gultia, Michael Caleb Obalan, Noel Hernandez, Jhone Mychale Mariquit, Cherry Mae Villame, Jonathan Maglasang, Sherwin Guirnaldo

Sustainable Engineering and Innovation · 22.10.2026 · 8 (2) · 233-262

DOI: 10.37868/sei.v8i2.id955 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainable Engineering and Innovation, online erschienen am 22.10.2026. Verfasst von Wyrlo Ricablanca und 11 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing offers a practical approach for producing low-cost UAS structures; however, the impact response of additively manufactured fuselage sections carrying internal payloads remains insufficiently established. This study numerically investigates the high-speed impact response of a 3D-printed UAS forward fuselage carrying an inert RPG surrogate. An explicit-dynamics model was developed in ANSYS Explicit Dynamics and evaluated against published battery-to-plate impact data. Additional numerical verification included a PLA failure-strain sensitivity study and local surrogate-tip mesh refinement, while a 3.0 m drop-test simulation provided an approximately 400 MPa mechanical reference stress. Nine UAS impact cases were then simulated using velocities of 15, 20, and 25 m/s and approach angles of 0°, 22.5°, and 45°. Impact severity was characterized using the kinetic-energy reduction of the surrogate assembly, deltaKE=KE(t0)-KE(t), and equivalent (von Mises) stress at the surrogate tip. Increasing impact velocity generally increased the maximum observed kinetic-energy reduction, while greater impact obliquity reduced its magnitude and delayed its development. The highest observed deltaKE was 804.74 J at 25 m/s and 0°, while the lowest was 104.83 J at 15 m/s and 45°. Tip stress behavior exhibited a less uniform trend, with five of the nine cases reaching or exceeding the 400 MPa reference and the highest value, 564 MPa, occurring at 25 m/s and 45°. In eight cases, the maximum tip stress occurred before the maximum observed kinetic-energy reduction. Results indicate that although the global kinetic-energy reduction of the RPG surrogate assembly and the maximum local tip stress are influenced differently by impact velocity, approach angle, and fuselage-collapse behavior, they still provide complementary measures of impact severity.

Zitieren

APA

Ricablanca, W., Padro, P. A., Cuajotor, B. J., Maligro, M. R., Tulang, H. M., Gultia, A. P., Obalan, M. C., Hernandez, N., Mariquit, J. M., Villame, C. M., Maglasang, J., & Guirnaldo, S. (2026). Numerical investigation of kinetic-energy reduction and tip equivalent (von Mises) stress of an RPG surrogate inside a 3D-printed UAS fuselage under high-speed impact. Sustainable Engineering and Innovation, 8(2), 233-262. https://doi.org/10.37868/sei.v8i2.id955

Vancouver

Ricablanca W, Padro PA, Cuajotor BJ, Maligro MR, Tulang HM, Gultia AP, et al. Numerical investigation of kinetic-energy reduction and tip equivalent (von Mises) stress of an RPG surrogate inside a 3D-printed UAS fuselage under high-speed impact. Sustainable Engineering and Innovation. 2026;8(2):233-262. doi:10.37868/sei.v8i2.id955

BibTeX
@article{Ricablanca2026,
  author = {Ricablanca, Wyrlo and Padro, Paula Alexandra and Cuajotor, Ben James and Maligro, Michael Ray and Tulang, Hannah Marie and Gultia, Alan Pierre-Miguel and Obalan, Michael Caleb and Hernandez, Noel and Mariquit, Jhone Mychale and Villame, Cherry Mae and Maglasang, Jonathan and Guirnaldo, Sherwin},
  title = {Numerical investigation of kinetic-energy reduction and tip equivalent (von Mises) stress of an RPG surrogate inside a 3D-printed UAS fuselage under high-speed impact},
  journal = {Sustainable Engineering and Innovation},
  year = {2026},
  volume = {8},
  number = {2},
  pages = {233--262},
  doi = {10.37868/sei.v8i2.id955}
}
Kostenlos starten →