EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A dual resonance high frequency bandpass filter

Sejla Dzakmic, Sehabeddin Taha Imeci

Sustainable Engineering and Innovation · 2020

DOI: 10.37868/sei.v2i1.26 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainable Engineering and Innovation, 2020. Verfasst von Sejla Dzakmic und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a design of a dual resonance high-frequency bandpass filter using the Sonnet EM Simulator. The filter prototype is enhanced by adding the short stub in the center of the design. A parametric study shows the impact of choosing appropriate configuration characteristics. This is a dual resonance bandpass filter design, with center frequencies 7.8 GHz and 9.3 GHz. Performed input match S_11 at first resonance is-28.87 dB and insertion loss S_21 is -0.05 dB. The obtained results at second resonance are S_11=-8.97 dB and S_21=-2.74 dB. Due to its characteristics, this is a high-Q medium bandwidth dual resonance bandpass filter. The design is simulated and planning to be fabricated with 0.36 mm thickness and dielectric constant ?_r=1. This paper benefits from its compact size and simple geometry over the similar filters found in the literature.

Zitieren

APA

Dzakmic, S., & Imeci, S. T. (2020). A dual resonance high frequency bandpass filter. Sustainable Engineering and Innovation. https://doi.org/10.37868/sei.v2i1.26

Vancouver

Dzakmic S, Imeci ST. A dual resonance high frequency bandpass filter. Sustainable Engineering and Innovation. 2020. doi:10.37868/sei.v2i1.26

BibTeX
@article{Dzakmic2020,
  author = {Dzakmic, Sejla and Imeci, Sehabeddin Taha},
  title = {A dual resonance high frequency bandpass filter},
  journal = {Sustainable Engineering and Innovation},
  year = {2020},
  doi = {10.37868/sei.v2i1.26}
}
Kostenlos starten →