METHODOLOGY FOR INVESTIGATING THE THERMAL INSULATION EFFICIENCY OF SPECIAL-PURPOSE SHIELDING MATERIALS
Випробування та сертифікація · 30.06.2026 · (2(12)) · 53-59
DOI: 10.37701/ts.12.2026.05 ↗Kurz gefasst
Fachartikel in der Zeitschrift Випробування та сертифікація, online erschienen am 30.06.2026. Verfasst von A. Kytsya und 5 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The rapid development of highly sensitive infrared detection technologies has raised an urgent issue of creating protective materials with low infrared emissivity and the ability to shield infrared radiation, especially in military confrontation conditions. Therefore, the current task is materials and coatings development and research for thermal (infrared) camouflage. The main requirements for IR protection and masking are to reduce the infrared radiation of the object to the surrounding environment level, which primarily depends on its surface temperature. The article presents the research results of the industrial samples surface thermal efficiency of protective clothing using the developed methodology based on direct temperature measurement of the sample outer under the action of a constant heat source. The developed methodology allows determining the heating rate and equilibrium surface temperature, which can serve as a criterion for assessing thermal insulation properties. The results of the measurements showed that for the best protective materials the heating rate was within (1‒2)·10-2 degrees/s, while for materials that did not meet the intended purpose the heating rate reached (5‒6)·10-2 degrees/s. The time for heating the material to the equilibrium temperature for samples with good thermal insulation properties was almost 2 times longer, and the maximum temperature of the sample compared to the ambient temperature was higher by a maximum of 7°C. Considering that the temperature of 40°C was chosen for the experiment, which exceeds the average temperature of the human body, this may indicate high thermal insulation properties of the studied samples. The obtained results showed that the developed methodology allows for the study of the thermal insulation properties of materials in laboratory conditions with sufficient accuracy.
Zitieren
APA
Kytsya, A., Makido, O., Khovanets, G., Zaborovskiy, A., Bolkot, P., & Vankevych, P. (2026). METHODOLOGY FOR INVESTIGATING THE THERMAL INSULATION EFFICIENCY OF SPECIAL-PURPOSE SHIELDING MATERIALS. Випробування та сертифікація, 53-59. https://doi.org/10.37701/ts.12.2026.05
Vancouver
Kytsya A, Makido O, Khovanets G, Zaborovskiy A, Bolkot P, Vankevych P. METHODOLOGY FOR INVESTIGATING THE THERMAL INSULATION EFFICIENCY OF SPECIAL-PURPOSE SHIELDING MATERIALS. Випробування та сертифікація. 2026:53-59. doi:10.37701/ts.12.2026.05
BibTeX
@article{Kytsya2026,
author = {Kytsya, A. and Makido, O. and Khovanets, G. and Zaborovskiy, A. and Bolkot, P. and Vankevych, P.},
title = {METHODOLOGY FOR INVESTIGATING THE THERMAL INSULATION EFFICIENCY OF SPECIAL-PURPOSE SHIELDING MATERIALS},
journal = {Випробування та сертифікація},
year = {2026},
number = {2(12)},
pages = {53--59},
doi = {10.37701/ts.12.2026.05}
}
EUVIMED