EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

METHODOLOGY FOR ASSESSING THE VIBRATION PROTECTION SYSTEM OF ELECTRONIC EQUIPMENT WHEN INSTALLED ON GROUND MOBILE OBJECTS

A. Dziuba, Yu. Budaretskyi, I. Lykova, M. Oliinyk, Yu. Tyshchenko

Випробування та сертифікація · 30.06.2026 · (2(12)) · 21-29

DOI: 10.37701/ts.12.2026.02 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Випробування та сертифікація, online erschienen am 30.06.2026. Verfasst von A. Dziuba und 4 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The reliability and operational stability of electronic equipment installed on ground mobile platforms are significantly influenced by external mechanical factors such as shock loads and vibration. During operation on rough terrain and under dynamic conditions, these loads are transmitted through the structural elements of the vehicle and affect the mounted electronic equipment, which may lead to functional failures, degradation of parameters, or mechanical damage to sensitive components. Therefore, the effective methods and technical solutions development aimed at improving the shock and vibration resistance of electronic equipment remains an important scientific and engineering task. The purpose of this study is to develop an integrated methodology for assessing shock and vibration loads acting on electronic equipment installed on dynamic platforms and to propose technical solutions for its protection through the use of vibration isolation systems. The research is focused on improving the accuracy of determining external mechanical influences and optimizing the parameters of vibration protection systems for electronic equipment. The methodology of the study is based on a comprehensive approach that combines experimental measurements, analytical calculations, and structural design solutions. A hardware–software complex has been developed for experimental determination of vibration and shock load parameters directly at the installation locations of electronic equipment on ground mobile platforms. The system includes multi-axis vibration sensors, signal amplification units, data acquisition modules, and specialized software for processing and analyzing measurement results. This configuration enables the registration of vibration signals in three orthogonal directions and allows detailed analysis of mechanical loads dynamic characteristics. Based on the obtained experimental data, a method for calculating the parameters of a vibration isolation system is proposed. The methodology considers the mass and geometric characteristics of the electronic equipment, its center location of mass, moments of inertia, as well as the mechanical characteristics of the available vibration isolators. The calculation procedure includes the determination of static and dynamic parameters of the vibration isolation system, the selection of the isolators optimal arrangement scheme, and the evaluation of their effectiveness in reducing shock and vibration loads. Experimental studies were carried out under conditions simulating the operation of ground mobile platforms on uneven terrain. Oscillograms of vibration loads were obtained and analyzed, which made it possible to determine the spectral characteristics of mechanical influences acting on the electronic equipment. The experimental results confirmed the effectiveness of the proposed measurement approach and demonstrated the possibility of improving the accuracy of input data for vibration isolation system design. In addition, a set of unified mounting brackets for installing electronic equipment and vibration isolation platforms on various structural elements of ground mobile platforms has been developed. These design solutions ensure reliable fastening of the equipment and allow quick installation on both flat and cylindrical structural surfaces of the vehicle. The obtained results make it possible to improve the reliability, durability, and operational stability of electronic equipment operating under conditions of dynamic mechanical loads. The proposed approach provides a practical basis for optimizing vibration protection systems and can be applied in the design, testing, and modernization of electronic equipment installed on military and specialized ground vehicles. Further research is aimed at improving the structure of the hardware–software complex, increasing vibration measurements accuracy, and developing advanced algorithms for processing experimental data.

Zitieren

APA

Dziuba, A., Budaretskyi, Y., Lykova, I., Oliinyk, M., & Tyshchenko, Y. (2026). METHODOLOGY FOR ASSESSING THE VIBRATION PROTECTION SYSTEM OF ELECTRONIC EQUIPMENT WHEN INSTALLED ON GROUND MOBILE OBJECTS. Випробування та сертифікація, 21-29. https://doi.org/10.37701/ts.12.2026.02

Vancouver

Dziuba A, Budaretskyi Y, Lykova I, Oliinyk M, Tyshchenko Y. METHODOLOGY FOR ASSESSING THE VIBRATION PROTECTION SYSTEM OF ELECTRONIC EQUIPMENT WHEN INSTALLED ON GROUND MOBILE OBJECTS. Випробування та сертифікація. 2026:21-29. doi:10.37701/ts.12.2026.02

BibTeX
@article{Dziuba2026,
  author = {Dziuba, A. and Budaretskyi, Yu. and Lykova, I. and Oliinyk, M. and Tyshchenko, Yu.},
  title = {METHODOLOGY FOR ASSESSING THE VIBRATION PROTECTION SYSTEM OF ELECTRONIC EQUIPMENT WHEN INSTALLED ON GROUND MOBILE OBJECTS},
  journal = {Випробування та сертифікація},
  year = {2026},
  number = {2(12)},
  pages = {21--29},
  doi = {10.37701/ts.12.2026.02}
}
Kostenlos starten →