EUVIMEDEUVIMED entdecken
Crossref

Electrical and Reliability of Ultra-Fine Line Multi-Redistribution Layers Enabled by an Innovative Excimer Laser Dual Damascene Process for Wafer-Level Packaging

Habib Hichri, Robert Gernhardt, Markus Woehrmann, Markus Arendt, Klaus-Dieter Lang

Wafer-Level Packaging Symposium · 2017

DOI: 10.37665/waaszdc37970 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Wafer-Level Packaging Symposium, 2017. Verfasst von Habib Hichri und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fan out wafer level packaging (FOWLP) continues to be the main driver for advanced packaging. Multi-chip integrated Fan-Out packages and high I/O CSPs demands for higher routing density on wafer level. However, there is a continuing need for low cost packaging. While traditional organic flip-chip substrates using semi-additive processes (SAP) have not been able to scale to ultra-fine RDL pitches and via opening below 10um, photo-sensitive spin-on dielectrics and RDL processes used for wafer level packaging do not sufficiently address the cost reduction need. This paper presents the latest results from innovative package and cost effective RDL and micro via processes using excimer laser ablation, to meet the market’s most stringent requirements. This paper presents a new excimer laser dual damascene process for ultra-fine routing for BEOL. Various materials like low cure temperature polyimide and dry-film ABF material are structured using an excimer laser stepper with a reticle mask to pattern feature size below 4 um with a high throughput. Micro-vias with a diameter below 5 um are realized with high aspect ratio which overcomes the photolithographic limitations of the common used photosensitive thin-film polymers. The laser structuring provides access to innovative dielectric materials for WLP with optimized mechanical and electrical parameters for example inorganic filled polymers like dry-film ABF materials, which do not have to be photosensitive. We propose new patterning process that uses excimer laser ablation to integrate via and RDL traces in one patterning process step, followed by seed layer deposition, plating and planarization steps. A new integration process flow is proposed, and its technical robustness and commercial advantages have been demonstrated. We will present electrical data of daisy chain formed by micro via and ultra-fine RDL traces patterned by Excimer laser in both photo and non photo materials. The reliability of two ultra-fine RDL layers patterned by excimer laser will be discussed. The commercial benefits of the new laser based patterning process as compared to the current process of record (POR) will be highlighted.

Zitieren

APA

Hichri, H., Gernhardt, R., Woehrmann, M., Arendt, M., & Lang, K. (2017). Electrical and Reliability of Ultra-Fine Line Multi-Redistribution Layers Enabled by an Innovative Excimer Laser Dual Damascene Process for Wafer-Level Packaging. Wafer-Level Packaging Symposium. https://doi.org/10.37665/waaszdc37970

Vancouver

Hichri H, Gernhardt R, Woehrmann M, Arendt M, Lang K. Electrical and Reliability of Ultra-Fine Line Multi-Redistribution Layers Enabled by an Innovative Excimer Laser Dual Damascene Process for Wafer-Level Packaging. Wafer-Level Packaging Symposium. 2017. doi:10.37665/waaszdc37970

BibTeX
@article{Hichri2017,
  author = {Hichri, Habib and Gernhardt, Robert and Woehrmann, Markus and Arendt, Markus and Lang, Klaus-Dieter},
  title = {Electrical and Reliability of Ultra-Fine Line Multi-Redistribution Layers Enabled by an Innovative Excimer Laser Dual Damascene Process for Wafer-Level Packaging},
  journal = {Wafer-Level Packaging Symposium},
  year = {2017},
  doi = {10.37665/waaszdc37970}
}
Kostenlos starten →