Ion Beam Etching as a Disruptive Integration Strategy for Advanced Logic: From T2T Scaling to Tilted 3D-IC Routing
Pan Pacific Symposium · 2026-02 · 29 (1) · 81-86
DOI: 10.37665/ppbvect83457 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pan Pacific Symposium, 2026-02. Verfasst von Jongsoon Park und 15 weiteren Autor:innen.
Abstract (Originalsprache)
As semiconductor scaling reaches the 1.4nm node and beyond, extreme ultraviolet (EUV) lithography faces critical cost and physical constraints, particularly the tip-to-tip (T2T) spacing bottleneck. To address these challenges, we evaluate directional ion-beam etching (IBE) as a disruptive 3D patterning strategy to enable T2T shrinkage without additional EUV cut masks. We compare two distinct IBE architectures (that is, Grid and Ribbon Beam Systems) and it is found that, Ribbon Beam System showed better angle control characteristics and, for the Ribbon Beam System, precise angular control of the ion beam allows for a Y/X etch selectivity exceeding 10:1 in 42nm back end of line (BEOL) patterns. This directional selectivity is further utilized to propose a novel 3D-IC interconnect strategy: tilted routing. By departing from traditional orthogonal coordinates and adopting diagonal routing paths inspired by IBE ion trajectories, we demonstrate the potential to eliminate up to four EUV-patterned layers (Via1/2, M2/3) in optimized logic structures. The feasibility of this approach has been validated on a 42nm pitch BEOL pattern, confirming targeted critical dimension (CD) modulation and successful integration. From a manufacturing perspective, the proposed IBE-based integration can deliver a reduction of 30 auxiliary process steps, resulting in estimated cost savings of approximately $30 million per 10,000 wafers. These results establish IBE-enabled tilted routing as a scalable and cost-effective solution for next-generation 3D-IC architectures, offering a viable pathway to extend scaling trends beyond the limits of conventional EUV lithography.
Zitieren
APA
Park, J., Bai, K. H., Ra, H., Son, S., Hong, S., Choi, B. K., Kim, S., Park, Y. J., Kim, K. L., Kim, S., Hong, J. W., Kim, S., Lee, J. M., Song, J., Park, J., & Yeom, G. Y. (2026). Ion Beam Etching as a Disruptive Integration Strategy for Advanced Logic: From T2T Scaling to Tilted 3D-IC Routing. Pan Pacific Symposium, 29(1), 81-86. https://doi.org/10.37665/ppbvect83457
Vancouver
Park J, Bai KH, Ra H, Son S, Hong S, Choi BK, et al. Ion Beam Etching as a Disruptive Integration Strategy for Advanced Logic: From T2T Scaling to Tilted 3D-IC Routing. Pan Pacific Symposium. 2026;29(1):81-86. doi:10.37665/ppbvect83457
BibTeX
@article{Park2026,
author = {Park, Jongsoon and Bai, Keun Hee and Ra, Hyonwook and Son, Seongho and Hong, Seongjun and Choi, Back Kyu and Kim, Sungtaek and Park, Yun Jae and Kim, Kyung Lim and Kim, Sunjung and Hong, Jong Woo and Kim, Sunghyun and Lee, Jong Myeong and Song, Jaihyuk and Park, Jongchul and Yeom, Geun Young},
title = {Ion Beam Etching as a Disruptive Integration Strategy for Advanced Logic: From T2T Scaling to Tilted 3D-IC Routing},
journal = {Pan Pacific Symposium},
year = {2026},
volume = {29},
number = {1},
pages = {81--86},
doi = {10.37665/ppbvect83457}
}
EUVIMED