Condition Monitoring System: A Flexible Hybrid Electronics Approach for Sealed Container Applications
Journal of Surface Mount Technology · 2024
DOI: 10.37665/631d5y77 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Surface Mount Technology, 2024. Verfasst von M. Panahi und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
A comparative study is presented between two advanced flexible hybrid electronics (FHE) monitoring systems designed for accurately measuring temperature within storage containers across various industries, including food, pharmaceuticals, agriculture, automotive, and defense. Flexible hybrid electronics involve the combination of novel printing processes and traditional electronic manufacturing processes, resulting in flexible devices with improved performance. The first system, a copper-flex system (CFS), employs an 88.9 μm polyimide substrate with 35 μm thick copper traces, coated with a 12.5 μm polyimide solder mask. The second system, a printed-flex system (PFS), utilizes a 127 μm polyimide substrate and screenprinted conductive silver ink. Both FHE systems use a 32-pin very thin quad flat no-lead (VQFN) package attached on a thin polyimide flexible substrate with high-temperature resistance and high-tensile strength. In both CFS and PFS, the VQFN is attached using Sn96.5/Ag3.0/Cu0.5 and Sn42/Bi57.6/Ag0.4 solders, respectively, from Chip Quik® (Ancaster, Ontario, Canada). After assembly, reliability and durability tests were conducted to validate the performance of the temperature sensor and the interconnections of the CFS and PFS prototypes. Further, environmental and mechanical characterizations including, moisture and insulation resistance, corrosion, elongation, bending, terminal bond strength, and peel tests were performed based on IPC-TM-650 and ASTM standards. Moisture and insulation resistance test on the PFS test coupons without a coating layer indicated stable resistance of approximately 18 MΩ, while permanent color change indicated oxidation of copper on uncoated CFS test coupons. After 72 hours of corrosion test, both the CFS and PFS “meander line” test coupons covered with polyimide showed negligible weight and resistance change of approximately 0.35%, and 0%, respectively. A Young's modulus of 7.17 GPa and 2.6 GPa was calculated from the elongation test for the CFS and PFS, respectively. Bending tests on PFS revealed negligible average resistance change (0.1%) during 180° bending cycles, while no impact was recorded on the CFS system. During the terminal bond strength test, soldered wires detached from the CFS test coupons at an average force of 43 N, while it was 3.8 N on the PFS test coupons. Both systems with polyimide coating layer demonstrate robustness and reliability for diverse applications in various industries.
Zitieren
APA
Panahi, M., Hanson, A. J., Maddipatla, D., Masihi, S., Narakathu, B. B., Bazuin, B. J., Miller, S., & Atashbar, M. Z. (2024). Condition Monitoring System: A Flexible Hybrid Electronics Approach for Sealed Container Applications. Journal of Surface Mount Technology. https://doi.org/10.37665/631d5y77
Vancouver
Panahi M, Hanson AJ, Maddipatla D, Masihi S, Narakathu BB, Bazuin BJ, et al. Condition Monitoring System: A Flexible Hybrid Electronics Approach for Sealed Container Applications. Journal of Surface Mount Technology. 2024. doi:10.37665/631d5y77
BibTeX
@article{Panahi2024,
author = {Panahi, M. and Hanson, A. J. and Maddipatla, D. and Masihi, S. and Narakathu, B. B. and Bazuin, B. J. and Miller, S. and Atashbar, M. Z.},
title = {Condition Monitoring System: A Flexible Hybrid Electronics Approach for Sealed Container Applications},
journal = {Journal of Surface Mount Technology},
year = {2024},
doi = {10.37665/631d5y77}
}
EUVIMED