Strength and Impact Resistance of Concrete Reinforced with Thermally Treated Polyethylene Terephthalate (PET) Fibers
Iraqi Journal of Civil Engineering · 30.06.2026 · 20 (1) · 105-115
DOI: 10.37650/ijce200108 ↗Kurz gefasst
Fachartikel in der Zeitschrift Iraqi Journal of Civil Engineering, online erschienen am 30.06.2026. Verfasst von Awaz Nader und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Polyethylene terephthalate (PET) plastics are widely discarded in nature as waste material after use. Therefore, its incorporation in concrete composite not only gains environmentally benefits but also improves some of the concrete properties. This study has been undertaken to investigate the effect of adding thermally treated PET fibers on compressive and splitting tensile strengths as well as impact resistance of normal concrete. Three normal concrete mixes were produced as reference mix (without PET fibers), mix with untreated PET fibers and mix with thermally treated PET fibers. A thermal treatment was done by exposing the PET fibers to a flame at 130 degrees in oven for 5 minutes and the PET fibers was added at 1% of the total mix volume. From the findings, it was noticed that adding untreated PET fibers not only decreased the compressive strength by about 15.5% but also the impact resistance by about 58%. However, introducing the thermally treated PET fibers helped in offsetting these reductions and making the strength and impact values close to those of the reference mix (without PET fibers). Due to their irregular shapes and having less pores in their interfaces with the cement paste, adding thermally treated PET fibers helped in achieving a remarkable improvement in splitting tensile strength by about 27.8% compared to the reference mix. It can be concluded that the investigated thermally treated PET fibers reinforced concrete is suited in structural applications where cracking control and energy absorption are more critical than the compressive strength.
Zitieren
APA
Nader, A., & Wardeh, G. (2026). Strength and Impact Resistance of Concrete Reinforced with Thermally Treated Polyethylene Terephthalate (PET) Fibers. Iraqi Journal of Civil Engineering, 20(1), 105-115. https://doi.org/10.37650/ijce200108
Vancouver
Nader A, Wardeh G. Strength and Impact Resistance of Concrete Reinforced with Thermally Treated Polyethylene Terephthalate (PET) Fibers. Iraqi Journal of Civil Engineering. 2026;20(1):105-115. doi:10.37650/ijce200108
BibTeX
@article{Nader2026,
author = {Nader, Awaz and Wardeh, George},
title = {Strength and Impact Resistance of Concrete Reinforced with Thermally Treated Polyethylene Terephthalate (PET) Fibers},
journal = {Iraqi Journal of Civil Engineering},
year = {2026},
volume = {20},
number = {1},
pages = {105--115},
doi = {10.37650/ijce200108}
}
EUVIMED