EUVIMEDEUVIMED entdecken
Crossref

Simulation and Analysis of the Four-Stroke Otto Cycle Under Constant-Volume Conditions Using MATLAB

Ahmed sarhang Hawar

Anbar Journal of Engineering Sciences · 20.05.2026 · 17 (1) · 34-44

DOI: 10.37649/ajes.25.0042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Anbar Journal of Engineering Sciences, online erschienen am 20.05.2026. Verfasst von Ahmed sarhang Hawar.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The cycle of an internal combustion engine (ICE) is undergoing a gradual change as a result of the quest of maximum efficiency, performance, and zero emissions, that are frequently attained by means of a series of experiments. Therefore, in this research, the method of heat release at a constant volume is analyzed. It was done by creating a computational computer code to investigate an internal combustion engine and calculating its pressure, work, and thermal efficiency under different conditions using the MATLAB programming language. The simulation process included changing compression ratio and inlet pressure. The results show that by raising the input pressure above the pressure of the atmosphere, the engine is in a state of overfeeding and practically the work produced and consequently the nominal average effective pressure increase significantly. Furthermore, an elevation in the compression ratio leads to enhancements in thermal efficiency and nominal mean effective pressure, consequently resulting in an increase in the maximum pressure and temperature within the combustion chamber, which requires attention and prevention of unwanted combustion in the engine. With ignition advance from 20 to 80 degrees beyond top dead center, the amount of work produced decreases by about 50 percent due to the presence of negative work. This causes special attention to the ignition start time in internal combustion engines and precise adjustment of the combustion time.

Zitieren

APA

Hawar, A. S. (2026). Simulation and Analysis of the Four-Stroke Otto Cycle Under Constant-Volume Conditions Using MATLAB. Anbar Journal of Engineering Sciences, 17(1), 34-44. https://doi.org/10.37649/ajes.25.0042

Vancouver

Hawar AS. Simulation and Analysis of the Four-Stroke Otto Cycle Under Constant-Volume Conditions Using MATLAB. Anbar Journal of Engineering Sciences. 2026;17(1):34-44. doi:10.37649/ajes.25.0042

BibTeX
@article{Hawar2026,
  author = {Hawar, Ahmed sarhang},
  title = {Simulation and Analysis of the Four-Stroke Otto Cycle Under Constant-Volume Conditions Using MATLAB},
  journal = {Anbar Journal of Engineering Sciences},
  year = {2026},
  volume = {17},
  number = {1},
  pages = {34--44},
  doi = {10.37649/ajes.25.0042}
}
Kostenlos starten →