He + FIBID-fabricated 3D AFM tip architectures: an exploratory study of hollow pillars, helices, and spirals
Beilstein Journal of Nanotechnology · 09.07.2026 · 17 · 863-871
DOI: 10.3762/bjnano.17.62 ↗Kurz gefasst
Fachartikel in der Zeitschrift Beilstein Journal of Nanotechnology, online erschienen am 09.07.2026. Verfasst von Alba Arroyo-Fructuoso und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Molecular Science, Universitat de València, Catedrático José Beltrán 2, 46980 Paterna, Spain. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Atomic force microscopy (AFM) relies strongly on tip geometry and mechanical integrity for stable and reproducible surface measurements. Here, we present an exploratory study of tungsten–carbon (W–C) AFM tips with complex three-dimensional (3D) architectures fabricated by helium ion beam-induced deposition (He + FIBID) directly onto commercial AFM cantilevers bearing a pre-existing tip. Hollow nanopillars, nanohelices, and nanospirals were tested on a calibrated reference sample with a nominal step height of 20 nm using two AFM instruments under comparable operating conditions. Under the conditions explored here, selected 3D-printed tips reproduced the nominal step height of the calibration structure, yielding values consistent with those obtained using commercial probes on the same sample. To relate probe operation to structural outcome, each tip was examined by electron microscopy before and after AFM use. The main degradation modes were geometric deformation of the apex or shaft and mechanical fracture, most frequently at the tip–cantilever interface. While a few structures remained operational through repeated measurement cycles, others failed during the initial approach or early scanning stages, highlighting current limitations in robustness and reproducibility. These results show that complex He + FIBID-grown nanoarchitectures can operate as AFM probes under basic test conditions, while also making clear that substantial optimization is still required.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Molecular Science, Universitat de València, Catedrático José Beltrán 2, 46980 Paterna, Spain.
- Institute for Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstraße 400, 01324 Dresden, Germany.
ORCID-Profile: Alba Arroyo-Fructuoso, Ana Galet, Gregor Hlawacek, Rosa Córdoba
Zitieren
APA
Arroyo-Fructuoso, A., Galet, A., Hlawacek, G., & Córdoba, R. (2026). He + FIBID-fabricated 3D AFM tip architectures: an exploratory study of hollow pillars, helices, and spirals. Beilstein Journal of Nanotechnology, 17, 863-871. https://doi.org/10.3762/bjnano.17.62
Vancouver
Arroyo-Fructuoso A, Galet A, Hlawacek G, Córdoba R. He + FIBID-fabricated 3D AFM tip architectures: an exploratory study of hollow pillars, helices, and spirals. Beilstein Journal of Nanotechnology. 2026;17:863-871. doi:10.3762/bjnano.17.62
BibTeX
@article{ArroyoFructuoso2026,
author = {Arroyo-Fructuoso, Alba and Galet, Ana and Hlawacek, Gregor and Córdoba, Rosa},
title = {He + FIBID-fabricated 3D AFM tip architectures: an exploratory study of hollow pillars, helices, and spirals},
journal = {Beilstein Journal of Nanotechnology},
year = {2026},
volume = {17},
pages = {863--871},
doi = {10.3762/bjnano.17.62}
}
EUVIMED