Determination of Mass Loss Rate and Smoke Generated of Jordanian Hardwood Timber under Different Flaming Combustion and Limited Ventilation Environment
WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS · 2020
DOI: 10.37394/232011.2020.15.11 ↗Kurz gefasst
Fachartikel in der Zeitschrift WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS, 2020. Verfasst von Ahmad S. Awad. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben.
Abstract (Originalsprache)
Natural wood has been used in structural applications for decades. Smoke from wood fires, additives and wood-protective coatings is a cause of death and serious injury in limited ventilation compartment. Ventilation restrictions in modern day designs complicate the combustion process and increase incomplete combustion products due to a reduction in the amount of oxygen available for fuel oxidation. Jordanian hardwood samples have been examined, tested and evaluated according to their mass loss rates, specific optical density, mass optical density, transmittance, and visibility using qualitative research used to realise the dynamics of fire phenomena. Four types of natural wood were tested under different heat fluxes with different Flaming combustion in a Smoke Density Chamber (SDC). The samples studied were Beech, Oak, Rhamnus, and Abies. The samples have been exposed to 25 and 50 kW/m2 heat fluxes in a limited ventilation compartment. Twelve samples were tested, each with dimensions of 75 x 75 mm and 10 mm thickness. An evaluation of the tested parameters, such as mass loss rate (MLR), specific optical density, transmittance, visibility and mass optical density (MOD have been carried out to determine their effectiveness as predictive parameters. Main results shows Beech has the lower values of specific optical density despite it has higher values of MLR% and MOD compared to other samples studied. Also, the mass loss rate (MLR %) increases with the heat flux even with different flaming conditions. In the opposite, there is a strong dependence for the mass optical density (MOD) on the heat flux and flaming conditions. Key conclusions have been drawn up that could be used in wood products and future works. The main objective of this work is to model the fire dynamic behavior in the pre-fire time. The results of this study can provide the bases for ventilation process and considerations of using natural woods in Jordan for different applications.
Zitieren
APA
Awad, A. S. (2020). Determination of Mass Loss Rate and Smoke Generated of Jordanian Hardwood Timber under Different Flaming Combustion and Limited Ventilation Environment. WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS. https://doi.org/10.37394/232011.2020.15.11
Vancouver
Awad AS. Determination of Mass Loss Rate and Smoke Generated of Jordanian Hardwood Timber under Different Flaming Combustion and Limited Ventilation Environment. WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS. 2020. doi:10.37394/232011.2020.15.11
BibTeX
@article{Awad2020,
author = {Awad, Ahmad S.},
title = {Determination of Mass Loss Rate and Smoke Generated of Jordanian Hardwood Timber under Different Flaming Combustion and Limited Ventilation Environment},
journal = {WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS},
year = {2020},
doi = {10.37394/232011.2020.15.11}
}
EUVIMED