Design and Simulation of QCA-based 4:1 Multiplexer: Energy Dissipation and Fault Tolerance Analysis
International Journal of Electrical and Electronics Research · 30.06.2026 · 590
DOI: 10.37391/ijeer.140234 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Electrical and Electronics Research, online erschienen am 30.06.2026. Verfasst von Amandeep Kaur und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Quantum Dot Cellular Automata has arisen as a promising nanotechnology for the enactment of high-density and ultra-low power digital circuits beyond conventional CMOS Technology. In this exertion a 4:1 QCA-based Multiplexer is designed using region-based interaction methodology and four-phase clocking scheme. The proposed design utilizes total 45 cells with area occupancy of 0.006 µm2 with latency of one clock cycle. To authenticate the design methodology, an alternative 40-cell layout design for 4:1 Multiplexer was also implemented so as to confirm the precision of the methodology. Simulation and functional verification were executed by using QCA Designer 2.0.3, while energy dissipation analysis was carried out using QCA Designer-E under Coherence Vector Energy Simulation engine at an operating Temperature of 1K by exploiting both Euler’s and Runge-Kutta Method numerical methods. The proposed design exhibits a total energy dissipation of 1.62×10-2 eV and an Average energy dissipation of 1.48×10-3 eV per cycle using Euler’s Method while Runge-Kutta Method reports total energy dissipation of 1.74×10-2 eV and average energy dissipation of 1.58×10-3 eV per cycle. The designed layout attained a cell omission tolerance of 66.67%, while misalignment analysis confirmations functional rates of 87.5%,87.5% and 75% for displacement values of 5nm,10nm, and 15nm. Furthermore, the correlation between kink energy and fault tolerance executed in this work confirms that regions with stronger electrostatic coupling exhibit improved robustness against fabrication-induced defects. Comparative analysis also shows better improvement in terms of energy dissipation and other performance parameters as compared to existing multiplexer designs, which indicates the suitability of the proposed architecture for reliable nanoscale QCA implementations.
Zitieren
APA
Kaur, A., Singh, C., & Sandhu, A. (2026). Design and Simulation of QCA-based 4:1 Multiplexer: Energy Dissipation and Fault Tolerance Analysis. International Journal of Electrical and Electronics Research, 590. https://doi.org/10.37391/ijeer.140234
Vancouver
Kaur A, Singh C, Sandhu A. Design and Simulation of QCA-based 4:1 Multiplexer: Energy Dissipation and Fault Tolerance Analysis. International Journal of Electrical and Electronics Research. 2026:590. doi:10.37391/ijeer.140234
BibTeX
@article{Kaur2026,
author = {Kaur, Amandeep and Singh, Charanjit and Sandhu, Amanpreet},
title = {Design and Simulation of QCA-based 4:1 Multiplexer: Energy Dissipation and Fault Tolerance Analysis},
journal = {International Journal of Electrical and Electronics Research},
year = {2026},
pages = {590},
doi = {10.37391/ijeer.140234}
}
EUVIMED