EUVIMEDEUVIMED entdecken
Crossref

Development of Potato-Derived Carbon Nanofibers as Sustainable Moisture-Regulating Supporting Layers for Photovoltaic Modules

Indri Dayana, Habib Satria, Nidya Chitraningrum, Mega Puspita Sari, Tino Hermanto, Yopan Rahmad Aldori, Dadan Ramdan, Syofyan Anwar Syahputra, Dina Maizana, Moranain Mungkin, Junaidi Junaidi, Ade Irma Sagala und 1 weitere

Journal of Applied Engineering and Technological Science (JAETS) · 17.06.2026 · 7 (2) · 1691-1702

DOI: 10.37385/jaets.v7i2.9175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering and Technological Science (JAETS), online erschienen am 17.06.2026. Verfasst von Indri Dayana und 12 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Moisture-induced degradation remains a critical reliability issue in photovoltaic (PV) modules, particularly in humid tropical climates. While biomass-derived carbon materials have been widely investigated for electrochemical applications, their use as functional supporting layers in PV modules remains limited. This study develops potato-derived carbon nanofibers through moderate-temperature carbonization (700 °C, N₂ atmosphere) followed by electrospinning. Structural and chemical properties were evaluated using XRD, FTIR, Raman spectroscopy, and BET surface area analysis. Morphology and fiber diameter distribution were examined via SEM. Electrical conductivity was measured using a four-point probe method. Water vapor permeability (WVP) and biodegradation behavior were assessed to evaluate durability and moisture regulation capability. The synthesized material exhibits predominantly amorphous turbostratic carbon with characteristic D and G Raman bands (ID/IG ≈ 0.92), specific surface area of 186 ± 12 m²/g, and electrical conductivity of 3.8 ± 0.4 S/m. Nanofiber diameters range from 72–108 nm (mean ± SD). Controlled WVP (3200–4100 mg/day/L) and moderate biodegradability (8–12% mass loss over 14 days) indicate balanced vapor diffusion and structural integrity. The results demonstrate the feasibility of potato-derived carbon nanofibers as sustainable moisture-regulating supporting layers in photovoltaic modules.

Zitieren

APA

Dayana, I., Satria, H., Chitraningrum, N., Sari, M. P., Hermanto, T., Aldori, Y. R., Ramdan, D., Syahputra, S. A., Maizana, D., Mungkin, M., Junaidi, J., Sagala, A. I., & Rahayu, S. U. (2026). Development of Potato-Derived Carbon Nanofibers as Sustainable Moisture-Regulating Supporting Layers for Photovoltaic Modules. Journal of Applied Engineering and Technological Science (JAETS), 7(2), 1691-1702. https://doi.org/10.37385/jaets.v7i2.9175

Vancouver

Dayana I, Satria H, Chitraningrum N, Sari MP, Hermanto T, Aldori YR, et al. Development of Potato-Derived Carbon Nanofibers as Sustainable Moisture-Regulating Supporting Layers for Photovoltaic Modules. Journal of Applied Engineering and Technological Science (JAETS). 2026;7(2):1691-1702. doi:10.37385/jaets.v7i2.9175

BibTeX
@article{Dayana2026,
  author = {Dayana, Indri and Satria, Habib and Chitraningrum, Nidya and Sari, Mega Puspita and Hermanto, Tino and Aldori, Yopan Rahmad and Ramdan, Dadan and Syahputra, Syofyan Anwar and Maizana, Dina and Mungkin, Moranain and Junaidi, Junaidi and Sagala, Ade Irma and Rahayu, Siti Utari},
  title = {Development of Potato-Derived Carbon Nanofibers as Sustainable Moisture-Regulating Supporting Layers for Photovoltaic Modules},
  journal = {Journal of Applied Engineering and Technological Science (JAETS)},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {1691--1702},
  doi = {10.37385/jaets.v7i2.9175}
}
Kostenlos starten →