EUVIMEDEUVIMED entdecken
Crossref

The Optimisation of Technological Parameters of Centrifugal Impact Crushers for Grain Grinding

Natalya Kamysheva, Ayap Kurmanov, Vladimir Sapa, Serik Akhanov

Journal of Applied Engineering and Technological Science (JAETS) · 16.06.2026 · 7 (2) · 1655-1672

DOI: 10.37385/jaets.v7i2.10302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering and Technological Science (JAETS), online erschienen am 16.06.2026. Verfasst von Natalya Kamysheva und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to increase the energy efficiency and product uniformity of centrifugal impact crushers for feed grain processing through targeted optimisation of technological parameters. A direct-impact mechanism was implemented by profiling the stationary impact lining with an involute tooth geometry that ensures grain collisions at a 90° angle, minimising kinetic energy losses. Experimental tests were conducted on pea grain (moisture 11.6%) using a prototype crusher developed at Kostanay Regional University. Rotor speed was set at 2000 rpm, throughput maintained at 400 kg/h. The optimised crusher achieved a specific energy consumption of 2.89 kWh/t, which is 22% lower than a conventional impact crusher of similar capacity. The crushed product had an arithmetic mean particle size of 1.31 mm with 85% of particles within the 0.5-1.5 mm range, meeting zootechnical standards. Theoretically, this work refines comminution models by quantifying the effect of impact angle on breakage efficiency and provides a design criterion (involute profile with 47°-56° contact angles) for normal-impact crushers. Practically, the prototype offers a low-energy, high-uniformity solution suitable for feed mills and can be retrofitted into existing machines. The main contribution is the experimental validation that deliberate alignment of impact geometry reduces specific energy by over one-fifth without sacrificing throughput or quality, opening a new direction for energy-efficient grinder design.

Zitieren

APA

Kamysheva, N., Kurmanov, A., Sapa, V., & Akhanov, S. (2026). The Optimisation of Technological Parameters of Centrifugal Impact Crushers for Grain Grinding. Journal of Applied Engineering and Technological Science (JAETS), 7(2), 1655-1672. https://doi.org/10.37385/jaets.v7i2.10302

Vancouver

Kamysheva N, Kurmanov A, Sapa V, Akhanov S. The Optimisation of Technological Parameters of Centrifugal Impact Crushers for Grain Grinding. Journal of Applied Engineering and Technological Science (JAETS). 2026;7(2):1655-1672. doi:10.37385/jaets.v7i2.10302

BibTeX
@article{Kamysheva2026,
  author = {Kamysheva, Natalya and Kurmanov, Ayap and Sapa, Vladimir and Akhanov, Serik},
  title = {The Optimisation of Technological Parameters of Centrifugal Impact Crushers for Grain Grinding},
  journal = {Journal of Applied Engineering and Technological Science (JAETS)},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {1655--1672},
  doi = {10.37385/jaets.v7i2.10302}
}
Kostenlos starten →