EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

The Influence of Blade Rotational Speed and Guide Angle on the Quality of Shredded Cassava Using a Dual-Blade Cutting Machine

Auges Rafli Auges, Nanda Pranandita Pranandita, Erwansyah Erwansyah

JTTM : Jurnal Terapan Teknik Mesin · 30.10.2026 · 7 (2) · 462-477

DOI: 10.37373/jttm.v7i2.2733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JTTM : Jurnal Terapan Teknik Mesin, online erschienen am 30.10.2026. Verfasst von Auges Rafli Auges und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The slicing process is a crucial stage in the production of cassava chips, as the quality of the slices directly influences the final product quality and the efficiency of the processing operation. This study aims to analyze the effects of blade rotational speed and the tilt angle of the guide mechanism on the slicing output of a cassava chip machine equipped with two cutting blades. An experimental approach using a two-factor factorial design was employed, testing rotational speeds of 527 rpm, 763 rpm, and 997 rpm, combined with guide tilt angles of 0°, 22.5°, and 45°. Each treatment combination was replicated three times, resulting in a total of 27 experimental runs. The parameters observed included the percentage of high-quality slices, the percentage of defective slices, material loss, and yield. The results indicate that each treatment combination yielded different descriptive values. The highest percentage of high-quality slices (47.99%) was achieved with a rotational speed of 763 rpm and a guide tilt angle of 22.5°, with 52.01% defective slices, 2.54% material loss, and a yield of 46.77%. A two-way ANOVA revealed that neither the rotational speed, the guide tilt angle, nor their interaction had a statistically significant effect on the percentage of high-quality slices at a 5% significance level. Consequently, while the combination of 763 rpm and a 22.5° guide tilt angle produced the best descriptive results within the tested range, it cannot be considered statistically different from the other treatments

Zitieren

APA

Auges, A. R., Pranandita, N. P., & Erwansyah, E. (2026). The Influence of Blade Rotational Speed and Guide Angle on the Quality of Shredded Cassava Using a Dual-Blade Cutting Machine. JTTM : Jurnal Terapan Teknik Mesin, 7(2), 462-477. https://doi.org/10.37373/jttm.v7i2.2733

Vancouver

Auges AR, Pranandita NP, Erwansyah E. The Influence of Blade Rotational Speed and Guide Angle on the Quality of Shredded Cassava Using a Dual-Blade Cutting Machine. JTTM : Jurnal Terapan Teknik Mesin. 2026;7(2):462-477. doi:10.37373/jttm.v7i2.2733

BibTeX
@article{Auges2026,
  author = {Auges, Auges Rafli and Pranandita, Nanda Pranandita and Erwansyah, Erwansyah},
  title = {The Influence of Blade Rotational Speed and Guide Angle on the Quality of Shredded Cassava Using a Dual-Blade Cutting Machine},
  journal = {JTTM : Jurnal Terapan Teknik Mesin},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {462--477},
  doi = {10.37373/jttm.v7i2.2733}
}
Kostenlos starten →