Design, Fabrication, and Structural Strength Analysis of a Special Service Tool for Grundfos Unilift Type KP Pump Housing
JTTM : Jurnal Terapan Teknik Mesin · 30.09.2026 · 7 (2) · 387-401
DOI: 10.37373/jttm.v7i2.2607 ↗Kurz gefasst
Fachartikel in der Zeitschrift JTTM : Jurnal Terapan Teknik Mesin, online erschienen am 30.09.2026. Verfasst von Hussein Ramza Syaukiy Alfida und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Typical maintenance tools for pumps may damage parts and prolong service time. The aim of this study is to develop and structurally optimize a Special Service Tool (SST) for Grundfos Unilift KP pump housings using Finite Element Analysis (FEA). Instead of automotive tools, the geometric design variation, material selection, numerical simulation and experimental validation are utilized in fluid machinery in this research. Five configurations of the SSTs were modeled and analyzed using FEA with material S45C carbon steel and SS304 stainless steel for total deformation, von Mises stress, elastic strain energy and safety factor. It was noted that Design 4 has the best structural performance as it has the least deformation of 0.0517 mm, low stress-strain responses; and high safety factor of 10.76. The fabricated optimal design was experimentally validated with a high degree of success, achieving a 98.19% reduction in disassembly time and eliminating any damage to the housing pins. The study has proved that the structural optimization through FEA is helpful in the development of SST, which enhances the efficiency of maintenance and protects the components.
Zitieren
APA
Alfida, H. R. S., Zaenudin, M., & Mahmud, R. (2026). Design, Fabrication, and Structural Strength Analysis of a Special Service Tool for Grundfos Unilift Type KP Pump Housing. JTTM : Jurnal Terapan Teknik Mesin, 7(2), 387-401. https://doi.org/10.37373/jttm.v7i2.2607
Vancouver
Alfida HRS, Zaenudin M, Mahmud R. Design, Fabrication, and Structural Strength Analysis of a Special Service Tool for Grundfos Unilift Type KP Pump Housing. JTTM : Jurnal Terapan Teknik Mesin. 2026;7(2):387-401. doi:10.37373/jttm.v7i2.2607
BibTeX
@article{Alfida2026,
author = {Alfida, Hussein Ramza Syaukiy and Zaenudin, Mohamad and Mahmud, Rizal},
title = {Design, Fabrication, and Structural Strength Analysis of a Special Service Tool for Grundfos Unilift Type KP Pump Housing},
journal = {JTTM : Jurnal Terapan Teknik Mesin},
year = {2026},
volume = {7},
number = {2},
pages = {387--401},
doi = {10.37373/jttm.v7i2.2607}
}
EUVIMED