EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effect of Testing Temperature on the Impact Toughness and Fracture Characteristics of Leaf Spring Steel Using the Charpy Impact Test

Sahrin Ahadi, Burhan Hafid, Suhardiman, Murdani, Irwan Kurniawan

JTTM : Jurnal Terapan Teknik Mesin · 28.10.2026 · 7 (2) · 418-425

DOI: 10.37373/jttm.v7i2.2499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JTTM : Jurnal Terapan Teknik Mesin, online erschienen am 28.10.2026. Verfasst von Sahrin Ahadi und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Leaf spring steel is widely used in commercial vehicle suspension systems because of its high strength, elasticity, and resistance to cyclic loading. Since suspension components are subjected to dynamic impact loads under various service temperatures, understanding the influence of testing temperature on impact toughness is essential for evaluating their reliability. Previous studies have primarily focused on the effects of heat treatment or wide temperature ranges on spring steels, while experimental investigations on commercial leaf spring steel at moderate service temperatures are still limited. In addition, the relationship between chemical composition, impact toughness, and fracture characteristics under these conditions has not been comprehensively discussed. Therefore, this study aims to evaluate the effect of testing temperatures of 30°C and 50°C on the impact toughness and fracture characteristics of commercial leaf spring steel. The novelty of this research lies in the integrated evaluation of chemical composition using Optical Emission Spectrometry (OES), Charpy impact testing in accordance with ASTM E23-24, and stereoscopic fracture surface observation to correlate testing temperature with absorbed impact energy, impact value, and fracture behavior. Six standard Charpy V-notch specimens (55 mm × 10 mm × 10 mm) were tested, consisting of three specimens at each temperature condition. The results showed that increasing the testing temperature from 30°C to 50°C increased the average absorbed impact energy from 9.26 J to 14.85 J and the average impact value from 0.181 J/mm² to 0.280 J/mm². Fracture surface observations revealed a transition from mixed ductile–brittle fracture at 30°C to predominantly ductile fracture at 50°C, characterized by rougher and more fibrous fracture surfaces. These findings demonstrate that moderate temperature increases significantly improve the impact toughness and ductility of commercial leaf spring steel. The results provide experimental data that can support the evaluation, material selection, and reliability assessment of leaf spring components operating under practical service temperatures in commercial vehicle suspension systems.

Zitieren

APA

Ahadi, S., Hafid, B., Suhardiman, Murdani, & Kurniawan, I. (2026). Effect of Testing Temperature on the Impact Toughness and Fracture Characteristics of Leaf Spring Steel Using the Charpy Impact Test. JTTM : Jurnal Terapan Teknik Mesin, 7(2), 418-425. https://doi.org/10.37373/jttm.v7i2.2499

Vancouver

Ahadi S, Hafid B, Suhardiman, Murdani, Kurniawan I. Effect of Testing Temperature on the Impact Toughness and Fracture Characteristics of Leaf Spring Steel Using the Charpy Impact Test. JTTM : Jurnal Terapan Teknik Mesin. 2026;7(2):418-425. doi:10.37373/jttm.v7i2.2499

BibTeX
@article{Ahadi2026,
  author = {Ahadi, Sahrin and Hafid, Burhan and Suhardiman and Murdani and Kurniawan, Irwan},
  title = {Effect of Testing Temperature on the Impact Toughness and Fracture Characteristics of Leaf Spring Steel Using the Charpy Impact Test},
  journal = {JTTM : Jurnal Terapan Teknik Mesin},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {418--425},
  doi = {10.37373/jttm.v7i2.2499}
}
Kostenlos starten →