EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rekayasa Suhu Preheat dan Pendinginan terhadap Transformasi Fasa yang Memengaruhi Karakteristik Mekanik Sambungan Las GMAW Baja SPA-H pada Underframe Kereta

Alfi Tranggono Agus Salim, Muzdalifah Devani, Rhehan Adi Prakoso, Zaim Evan Prima Ataullah, Ajeng Isnain Putri, Anggit Ngesti Wandani, Thomas Alvin Suganda

Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal) · 2026

DOI: 10.37367/jpi.v10i2.747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal), 2026. Verfasst von Alfi Tranggono Agus Salim und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitieren

Abstract (Originalsprache)

This research was motivated by observations in the railway manufacturing industry that identified distortion in Gas Metal Arc Welding (GMAW) joints of SPA-H steel used as a material for railway underframes. Distortion occurs due to uneven heat distribution, resulting in non-uniform thermal expansion and contraction of the material. This study aims to analyze the effects of variations in preheat temperature and post-welding cooling methods on the mechanical characteristics and phase transformation of GMAW-welded SPA-H steel joints. The research employed a quantitative experimental method using a Design of Experiments (DoE) approach through a two-factor full factorial design. The preheat temperature variations consisted of 100–125 °C, 200–225 °C, and 300–325 °C, with air cooling and mist cooling methods. The tests included a tensile test, microindentation Vickers hardness test, and micro examination, which were analyzed using two-way Analysis of Variance (ANOVA). The results showed that a preheat temperature of 300–325 °C combined with mist cooling produced a yield strength of 485.9 MPa, an ultimate tensile strength of 537.4 MPa, Weld Metal hardness of 219.9 HV, and elongation of 22.2%. This condition also resulted in the highest pearlite percentage of 63.0%. The study concludes that increasing the preheat temperature increases tensile strength and hardness along with an increase in the pearlite percentage. The findings regarding variations in preheat temperature and cooling methods can serve as a basis for controlling the thermal cycle associated with the risk of distortion during the welding process of railway underframe structures.

Zitieren

APA

Salim, A. T. A., Devani, M., Prakoso, R. A., Ataullah, Z. E. P., Putri, A. I., Wandani, A. N., & Suganda, T. A. (2026). Rekayasa Suhu Preheat dan Pendinginan terhadap Transformasi Fasa yang Memengaruhi Karakteristik Mekanik Sambungan Las GMAW Baja SPA-H pada Underframe Kereta. Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal). https://doi.org/10.37367/jpi.v10i2.747

Vancouver

Salim ATA, Devani M, Prakoso RA, Ataullah ZEP, Putri AI, Wandani AN, et al. Rekayasa Suhu Preheat dan Pendinginan terhadap Transformasi Fasa yang Memengaruhi Karakteristik Mekanik Sambungan Las GMAW Baja SPA-H pada Underframe Kereta. Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal). 2026. doi:10.37367/jpi.v10i2.747

BibTeX
@article{Salim2026,
  author = {Salim, Alfi Tranggono Agus and Devani, Muzdalifah and Prakoso, Rhehan Adi and Ataullah, Zaim Evan Prima and Putri, Ajeng Isnain and Wandani, Anggit Ngesti and Suganda, Thomas Alvin},
  title = {Rekayasa Suhu Preheat dan Pendinginan terhadap Transformasi Fasa yang Memengaruhi Karakteristik Mekanik Sambungan Las GMAW Baja SPA-H pada Underframe Kereta},
  journal = {Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal)},
  year = {2026},
  doi = {10.37367/jpi.v10i2.747}
}
Kostenlos starten →