EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analisis Karakteristik Sifat Mekanik dan Struktur Mikro Aluminium 6061 dengan Variasi Temperatur Reforming pada Sidewall Prototype KCMP

Alfi Tranggono Agus Salim, Mochamad Reza Arimurti, Anisah Nurul Hidayati, Yanfirga Setyawan Putra Sinaga, Regita Aulia, Pungky Dhikha Sanjaya, Dimas Jauza Nirwana

Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal) · 2026

DOI: 10.37367/jpi.v10i1.551 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal), 2026. Verfasst von Alfi Tranggono Agus Salim und 6 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum 6061 is widely used in the railway industry due to its lightweight, corrosion-resistant, and good formability. However, the welding process often causes distortion that impacts the decline in mechanical performance. This research aims to analyze the effect of variations in reforming temperature on the mechanical properties and microstructure of Aluminum 6061 applied to the sidewall of the Red and White High-Speed ​​Train (KCMP) prototype. Experimental methods were carried out through tensile tests, bending tests, Vickers hardness tests, and microstructural observations on Aluminum 6061 material with a thickness of 8 mm that underwent reforming treatment at a temperature range of 125–150 °C, 175–200 °C, and 225–250 °C. The results showed that increasing the reforming temperature caused a decrease in yield strength, ultimate tensile strength, bending stress, and hardness, but increased elongation thereby improving the ductility of the material. Microstructural analysis confirmed the reduction of Mg₂Si precipitates at high temperatures which resulted in a decrease in hardness. The most optimal performance was obtained at a temperature treatment of 175–200 °C. This finding proves that the reforming temperature has a significant effect on the mechanical behavior and microstructural characteristics of Aluminum 6061 when used in KCMP sidewalls.

Zitieren

APA

Salim, A. T. A., Arimurti, M. R., Hidayati, A. N., Sinaga, Y. S. P., Aulia, R., Sanjaya, P. D., & Nirwana, D. J. (2026). Analisis Karakteristik Sifat Mekanik dan Struktur Mikro Aluminium 6061 dengan Variasi Temperatur Reforming pada Sidewall Prototype KCMP. Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal). https://doi.org/10.37367/jpi.v10i1.551

Vancouver

Salim ATA, Arimurti MR, Hidayati AN, Sinaga YSP, Aulia R, Sanjaya PD, et al. Analisis Karakteristik Sifat Mekanik dan Struktur Mikro Aluminium 6061 dengan Variasi Temperatur Reforming pada Sidewall Prototype KCMP. Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal). 2026. doi:10.37367/jpi.v10i1.551

BibTeX
@article{Salim2026,
  author = {Salim, Alfi Tranggono Agus and Arimurti, Mochamad Reza and Hidayati, Anisah Nurul and Sinaga, Yanfirga Setyawan Putra and Aulia, Regita and Sanjaya, Pungky Dhikha and Nirwana, Dimas Jauza},
  title = {Analisis Karakteristik Sifat Mekanik dan Struktur Mikro Aluminium 6061 dengan Variasi Temperatur Reforming pada Sidewall Prototype KCMP},
  journal = {Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal)},
  year = {2026},
  doi = {10.37367/jpi.v10i1.551}
}
Kostenlos starten →