Experimental Investigation for the Prediction of Surface Roughness Height Parameters in Abrasive Water Jet Cutting of Kevlar/epoxy Composites
Materiale Plastice · 04.10.2023 · 60 (3) · 94-105
DOI: 10.37358/mp.23.3.5679 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materiale Plastice, online erschienen am 04.10.2023. Verfasst von Dinu-Valentin Gubencu. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
The main objective of the research was to study the influence of the abrasive water jet cutting (AWJC) parameters on the surface roughness parameters Rz1max and Rt, obtained when processing Kevlar fiber-reinforced polymers (KFRP). For this purpose, a full factorial experimental program was designed and roughness evaluations were carried out in two different zones of the cut slot. In this way, it was possible to test the statistical significance of the input parameters effects and characterize both these regions, by means of prediction models proposed for each roughness parameter. Finally, response surfaces and level curves were represented to facilitate the selection of proper factors combination to achieve surface finish requirements.
Zitieren
APA
Gubencu, D. (2023). Experimental Investigation for the Prediction of Surface Roughness Height Parameters in Abrasive Water Jet Cutting of Kevlar/epoxy Composites. Materiale Plastice, 60(3), 94-105. https://doi.org/10.37358/mp.23.3.5679
Vancouver
Gubencu D. Experimental Investigation for the Prediction of Surface Roughness Height Parameters in Abrasive Water Jet Cutting of Kevlar/epoxy Composites. Materiale Plastice. 2023;60(3):94-105. doi:10.37358/mp.23.3.5679
BibTeX
@article{Gubencu2023,
author = {Gubencu, Dinu-Valentin},
title = {Experimental Investigation for the Prediction of Surface Roughness Height Parameters in Abrasive Water Jet Cutting of Kevlar/epoxy Composites},
journal = {Materiale Plastice},
year = {2023},
volume = {60},
number = {3},
pages = {94--105},
doi = {10.37358/mp.23.3.5679}
}
EUVIMED