EUVIMEDEUVIMED entdecken
Crossref

Failure Analysis of Friction Weld in Rear Axle Casing

G. K. Sivakumar, Ramya G Nair

ARAI Journal of Mobility Technology · 2022

DOI: 10.37285/ajmt.1.1.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ARAI Journal of Mobility Technology, 2022. Verfasst von G. K. Sivakumar und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, Housing and Spindle failed at Friction weld (FRW) interface and sample submitted was from a Passenger vehicle after covering 18410 Kms was considered to address the repeated weld failures reported in Rear Axle Casing. The Metallurgical examinations revealed, chemical composition and hardness found satisfactory whereas Microstructure reveals presence of MnS (Manganese Sulphide) Inclusions at the friction weld interface resulting in insufficient friction weld fusion.SEM and Metallographic examinations confirmed the Orientation of MnS (Manganese sulphide) along the surface of the Spindle that was subjected to Friction welding (FRW) resulting in insufficient weld fusion. Microstructure observation of Spindle shows inclusions of Type A - Thick 2 against the allowable limits in Raw Material Type A - Thick 1. Also, the elongated MnS inclusions at the Friction weld (FRW) Interface act as initiation sites, "Stress raiser "that is more vulnerable to failure due to comparatively less tensile and impact strength than base metal similar to the effect of flake graphite’s in cast iron. Due to the anisotropy and orientation of the sulfide inclusions there is reduction in transverse ductility in reduced area and not much significant effect in longitudinal direction. Inclusion control by calcium treatment or Electro slag re-melting in spindle raw material will significantly improve the ductility and toughness of friction weldments. This paper aims to study the effect of Sulfide inclusions on weldability, mechanical properties of weld Interface and role as fracture initiation site.

Zitieren

APA

Sivakumar, G. K., & Nair, R. G. (2022). Failure Analysis of Friction Weld in Rear Axle Casing. ARAI Journal of Mobility Technology. https://doi.org/10.37285/ajmt.1.1.1

Vancouver

Sivakumar GK, Nair RG. Failure Analysis of Friction Weld in Rear Axle Casing. ARAI Journal of Mobility Technology. 2022. doi:10.37285/ajmt.1.1.1

BibTeX
@article{Sivakumar2022,
  author = {Sivakumar, G. K. and Nair, Ramya G},
  title = {Failure Analysis of Friction Weld in Rear Axle Casing},
  journal = {ARAI Journal of Mobility Technology},
  year = {2022},
  doi = {10.37285/ajmt.1.1.1}
}
Kostenlos starten →