EUVIMEDEUVIMED entdecken
Crossref

Springback Analysis of AA5754 under Warm Stamping Conditions

Jun Liu

Engineering Science & Technology · 2019

DOI: 10.37256/est.112020104 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Science & Technology, 2019. Verfasst von Jun Liu. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Prediction of springback has been thoroughly investigated for cold forming processes; however with the rising prominence of lightweight materials and new forming technologies, predicting springback at elevated temperatures has become essential. In this paper, three analytical models and one empirical model were proposed to predict springback of an aluminium alloy AA5754 at warm forming conditions. The analytical models developed were based on the effect of the linear bending moment, uniform bending moment and through-thickness stress gradient respectively on springback, while the empirical model was developed using the results of L-shape bending tests. The model predictions were compared with the experiment results for various forming conditions. At room temperature, all four models had very good agreement. At elevated temperatures, the linear bending moment model was preferred for a die radius of 8mm, whereas empirical and stress gradient models were more suitable for a die radius of 4mm; in both cases, very close agreement was achieved where errors were within 5%.

Zitieren

APA

Liu, J. (2019). Springback Analysis of AA5754 under Warm Stamping Conditions. Engineering Science & Technology. https://doi.org/10.37256/est.112020104

Vancouver

Liu J. Springback Analysis of AA5754 under Warm Stamping Conditions. Engineering Science & Technology. 2019. doi:10.37256/est.112020104

BibTeX
@article{Liu2019,
  author = {Liu, Jun},
  title = {Springback Analysis of AA5754 under Warm Stamping Conditions},
  journal = {Engineering Science & Technology},
  year = {2019},
  doi = {10.37256/est.112020104}
}
Kostenlos starten →