STUDIES AND RESEARCH ON THE STABILITY OF A SANDSTONE QUARRY PRODUCTION
Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering · 2025 · 39 (2) · 53-65
DOI: 10.37193/sbsd.2025.2.06 ↗Kurz gefasst
Fachartikel in der Zeitschrift Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering, 2025. Verfasst von Dorel Gusat und 2 weiteren Autor:innen. Die Arbeit nennt 1 Literaturangaben.
Abstract (Originalsprache)
The stability assessment of sandstone open pit slopes represents a critical aspect in ensuring safe and sustainable mining operations , particularly in areas affected by geological complex and hydrogeological conditions . This study presents a numerical slope investigation stability for a sandstone open pit production using two -dimensional finite difference modeling implemented in FLAC2D. The research aims to evaluate the mechanical behavior of pit slopes under static conditions and to identify potential instability areas that May affection operational safety and long-term mine planning . Geotechnical parameters , including cohesion , friction angle , density , Young's modulus , and Poisson's ratio , were determined from FLAC2D data base and geological investigations. The numerical model was developed considering the actual pit geometry , stratigraphy succession , and boundary conditions representative of the mining environment [1], [2], [3], [4]. Different excavation internships were simulated to analyze stress redistribution , displacement patterns , and plastic deformation within the mass slope The modeling results indicate that slope stability is strongly influenced by bench geometry , discontinuity orientation , and variations in sandstone mechanical properties . Areas characterized by increased tension stress and shear foreign concentrations correspond to potential failure surfaces , particularly in sectors with weathered rock material and steep slope angles . The calculated displacement vector and shear plasticity areas highlight the objectionable sectors requiring reinforcement or geometry optimization . The study demonstrates the applicability of FLAC2D as an effective tool for predicting slope behavior in sandstone open pits and for supporting geotechnical risk management strategies . The obtained results contribute to improving operational safety , optimizing slope design, and reducing the likelihood of instability phenomena on the surface mining operations .
Zitieren
APA
Gusat, D., Bud, I., & Daraba, D. (2025). STUDIES AND RESEARCH ON THE STABILITY OF A SANDSTONE QUARRY PRODUCTION. Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering, 39(2), 53-65. https://doi.org/10.37193/sbsd.2025.2.06
Vancouver
Gusat D, Bud I, Daraba D. STUDIES AND RESEARCH ON THE STABILITY OF A SANDSTONE QUARRY PRODUCTION. Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering. 2025;39(2):53-65. doi:10.37193/sbsd.2025.2.06
BibTeX
@article{Gusat2025,
author = {Gusat, Dorel and Bud, Ioan and Daraba, Dinu},
title = {STUDIES AND RESEARCH ON THE STABILITY OF A SANDSTONE QUARRY PRODUCTION},
journal = {Scientific Bulletin Series D : Mining, Mineral Processing, Non-Ferrous Metallurgy, Geology and Environmental Engineering},
year = {2025},
volume = {39},
number = {2},
pages = {53--65},
doi = {10.37193/sbsd.2025.2.06}
}
EUVIMED