EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Separation of Co(II), Mn(II), and Ni(II) by solvent extraction with Cyanex 272 and D2EHPA from the sulfuric acid leaching solution of spent lithium-ion batteries

Man Seung Lee, Seol Ho Yun, Jiangxian Wen

Physicochemical Problems of Mineral Processing · 25.09.2024

DOI: 10.37190/ppmp/193742 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physicochemical Problems of Mineral Processing, online erschienen am 25.09.2024. Verfasst von Man Seung Lee und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Spent lithium-ion batteries contain valuable metals such as cobalt, lithium, manganese and nickel. Smelting reduction of spent LIBs at high temperature results in metallic alloys. Therefore, it is necessary to recover the valuable metal ions present in the sulfuric acid leaching solutions of the metallic alloys. In this work, solvent extraction experiments were performed to separate the three metal ions, Co(II), Mn(II) and Ni(II) present in the leaching solutions of the metallic alloys. Synthetic sulfate solutions were prepared and commercial organophosphorous extractants were employed. First, both Co(II) and Mn(II) were completely extracted in one stage by using 40% saponified 0.3 M Cyanex 272, leaving Ni(II) in the raffinate. The small amount of Ni(II) co-extracted into Cyanex 272 was removed by two stages of cross-current scrubbing using pure CoSO4 solution. The effect of pH and CoSO4 concentration of the scrubbing solution on the scrubbing of Ni(II) was investigated. The Co(II) and Mn(II) present in the scrubbed Cyanex 272 were completely stripped by 0.05 M H2SO4 solution. Batch simulation experiments for the three stage of counter-current extraction with 1 M D2EHPA verified that Mn(II) and Co(II) were completely separated by selective extraction of Mn(II) into D2EHPA, leaving Co(II) in the raffinate. By consecutive extraction with Cyanex 272 and D2EHPA, pure solutions of Co(II), Mn(II) and Ni(II) with purity higher than 99.9% can be recovered from the starting solutions. A process was proposed for the treatment of sulfuric acid leaching solutions of spent LIBs containing Co(II), Mn(II) and Ni(II) by solvent extraction.

Zitieren

APA

Lee, M. S., Yun, S. H., & Wen, J. (2024). Separation of Co(II), Mn(II), and Ni(II) by solvent extraction with Cyanex 272 and D2EHPA from the sulfuric acid leaching solution of spent lithium-ion batteries. Physicochemical Problems of Mineral Processing. https://doi.org/10.37190/ppmp/193742

Vancouver

Lee MS, Yun SH, Wen J. Separation of Co(II), Mn(II), and Ni(II) by solvent extraction with Cyanex 272 and D2EHPA from the sulfuric acid leaching solution of spent lithium-ion batteries. Physicochemical Problems of Mineral Processing. 2024. doi:10.37190/ppmp/193742

BibTeX
@article{Lee2024,
  author = {Lee, Man Seung and Yun, Seol Ho and Wen, Jiangxian},
  title = {Separation of Co(II), Mn(II), and Ni(II) by solvent extraction with Cyanex 272 and D2EHPA from the sulfuric acid leaching solution of spent lithium-ion batteries},
  journal = {Physicochemical Problems of Mineral Processing},
  year = {2024},
  doi = {10.37190/ppmp/193742}
}
Kostenlos starten →