EUVIMEDEUVIMED entdecken
Crossref

ANALYSIS OF SAFETY FACTOR OF SECURITY PLATES IN THE MINE "TREPÇA" STANTËRG

Rafet Rafi Zeqiri, Hadji Riheb, Zighmi Karim, Guesmi Younes, Boudjellal Rania, Mahleb Aniss

Mining Scince · 2019

DOI: 10.37190/msc192602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mining Scince, 2019. Verfasst von Rafet Rafi Zeqiri und 5 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Trepça mine was opened by traverbank from the First Tunnel and then through the central well to the depths of XI-th horizont (from 760m up to 12m), 11 horizonts were developed with vertical distance of 60m, while in the above part of the mines, between quotes 760m and 610m, 4 horizonts are developed with vertical spacing every 35m. The mine is about 750m deep and wide 2500m with an average of 20 mining bodies, which, in the horizontal cut have a size of 300 to 3000m2. In this paper it was analyzed the stability of the security plates of the ore in the "Trepça" mine in Stantërg, which are formed in ore during primary use. In the general part, will be given knowledge from the geological aspect of the mine and detailed knowledge on the exploitation systems of the mineral resource.

Zitieren

APA

Zeqiri, R. R., Riheb, H., Karim, Z., Younes, G., Rania, B., & Aniss, M. (2019). ANALYSIS OF SAFETY FACTOR OF SECURITY PLATES IN THE MINE "TREPÇA" STANTËRG. Mining Scince. https://doi.org/10.37190/msc192602

Vancouver

Zeqiri RR, Riheb H, Karim Z, Younes G, Rania B, Aniss M. ANALYSIS OF SAFETY FACTOR OF SECURITY PLATES IN THE MINE "TREPÇA" STANTËRG. Mining Scince. 2019. doi:10.37190/msc192602

BibTeX
@article{Zeqiri2019,
  author = {Zeqiri, Rafet Rafi and Riheb, Hadji and Karim, Zighmi and Younes, Guesmi and Rania, Boudjellal and Aniss, Mahleb},
  title = {ANALYSIS OF SAFETY FACTOR OF SECURITY PLATES IN THE MINE "TREPÇA" STANTËRG},
  journal = {Mining Scince},
  year = {2019},
  doi = {10.37190/msc192602}
}
Kostenlos starten →