A 3D Finite Element Model Quantifying Viscoelastic Boundary Condition and Simulation of Effects on Ocular Deformation and Optical Geometry
Acta of Bioengineering and Biomechanics · 2026
DOI: 10.37190/abb/217257 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta of Bioengineering and Biomechanics, 2026. Verfasst von Saeed Zahabi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Fundamental Problems of Technology, Department of Optics and Photonics, Wrocław University of Science and Technology, Wrocław, Poland. Hauptthemen laut MEDLINE: Finite Element Analysis, Elasticity, Computer Simulation, Models, Biological. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
Purpose
Investigate how orbital tissue mechanics, specifically stiffness and damping, influence intraocular pressure (IOP)–induced deformation and the resulting optical behavior of the human eye using a finite element (FE) framework.
Methods
A three-dimensional FE model of the entire eye was constructed, including corneal, scleral, and lens tissues with hyperelastic and elastic constitutive laws. The surrounding orbital support was represented by three boundary conditions: rigid, elastic (spring), and viscoelastic (spring-dashpot) to characterize different levels of orbital compliance. Unlike previous models, this approach explicitly accounts for orbital stiffness and damping to quantify their effects on ocular globe translation and deformation patterns. Simulations were performed at physiological IOP levels (6.5–26 mmHg), and the resulting variations in corneal curvature, anterior chamber depth, lens position, and optical focus were evaluated.
Results
The viscoelastic boundary condition significantly modulated IOP-induced eye globe displacement and deformation, producing slightly larger translations and smoothing stress concentrations compared to fixed constraints, indicating its crucial role in biomechanical realism. The changes in the distribution of the scleral strain were clear. Crucially, the resulting optical defocus across the physiological IOP range remained below the clinically non-significant threshold.
Conclusions
Integrating viscoelastic orbital boundaries demonstrates that the stiffness and damping effects of the orbital fat layer significantly modulate IOP-induced ocular deformation and optical geometry. Furthermore, the findings confirm that moderate pressure variations within the physiological range do not compromise visual performance. These results underscore the critical importance of incorporating extraocular tissue mechanics for accurate personalized tonometry calibration and risk assessment.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Fundamental Problems of Technology, Department of Optics and Photonics, Wrocław University of Science and Technology, Wrocław, Poland.
Zitieren
APA
Zahabi, S., Salimibani, M., Jóźwik, A., & Asejczyk, M. (2026). A 3D Finite Element Model Quantifying Viscoelastic Boundary Condition and Simulation of Effects on Ocular Deformation and Optical Geometry. Acta of Bioengineering and Biomechanics. https://doi.org/10.37190/abb/217257
Vancouver
Zahabi S, Salimibani M, Jóźwik A, Asejczyk M. A 3D Finite Element Model Quantifying Viscoelastic Boundary Condition and Simulation of Effects on Ocular Deformation and Optical Geometry. Acta of Bioengineering and Biomechanics. 2026. doi:10.37190/abb/217257
BibTeX
@article{Zahabi2026,
author = {Zahabi, Saeed and Salimibani, Milad and Jóźwik, Agnieszka and Asejczyk, Magdalena},
title = {A 3D Finite Element Model Quantifying Viscoelastic Boundary Condition and Simulation of Effects on Ocular Deformation and Optical Geometry},
journal = {Acta of Bioengineering and Biomechanics},
year = {2026},
doi = {10.37190/abb/217257}
}
EUVIMED