EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Analisis Defect Menggunakan Metode Failure Mode Effect Analysis (FMEA) pada Hasil Inspeksi Coating Material Tubing 3.5 Inch di Warehouse PT. X

Muhammad Fahrian Azhar Mardjun, Bambang Sugeng, Maeka Dita Puspa Syamtinningrum

Industrika : Jurnal Ilmiah Teknik Industri · 27.10.2026 · 10 (4) · 1077-1087

DOI: 10.37090/b43t2s43 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrika : Jurnal Ilmiah Teknik Industri, online erschienen am 27.10.2026. Verfasst von Muhammad Fahrian Azhar Mardjun und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the oil and gas industry, the exploitation process requires reliable equipment to ensure safe and efficient operations. This equipment is divided into surface and subsurface categories, with tubing as a key component. Tubing serves as a conduit for fluid flow from the reservoir to the surface, requiring adherence to strict standards to maintain operational reliability. Defects such as coating peel-off can increase the risk of leakage and pose safety hazards. This study analyzes coating defects in 3.5-inch tubing using the Fishbone Diagram and Failure Mode and Effect Analysis (FMEA) methods. The Fishbone Diagram identifies potential causes of defects across five factors: human, method, material, environment, and machine. FMEA is then used to prioritize these causes by evaluating Severity, Occurrence, and Detection to determine the Risk Priority Number (RPN). The findings indicate that the most dominant cause, with the highest RPN of 183.5, is rushed work. To mitigate this, it is recommended to revise and implement a more realistic work schedule to reduce the likelihood of similar coating defects in the future. Keywords: Defect, Failure Mode Effect Analysis, Fishbone Diagram, Risk Priority Number, Tubing

Zitieren

APA

Mardjun, M. F. A., Sugeng, B., & Syamtinningrum, M. D. P. (2026). Analisis Defect Menggunakan Metode Failure Mode Effect Analysis (FMEA) pada Hasil Inspeksi Coating Material Tubing 3.5 Inch di Warehouse PT. X. Industrika : Jurnal Ilmiah Teknik Industri, 10(4), 1077-1087. https://doi.org/10.37090/b43t2s43

Vancouver

Mardjun MFA, Sugeng B, Syamtinningrum MDP. Analisis Defect Menggunakan Metode Failure Mode Effect Analysis (FMEA) pada Hasil Inspeksi Coating Material Tubing 3.5 Inch di Warehouse PT. X. Industrika : Jurnal Ilmiah Teknik Industri. 2026;10(4):1077-1087. doi:10.37090/b43t2s43

BibTeX
@article{Mardjun2026,
  author = {Mardjun, Muhammad Fahrian Azhar and Sugeng, Bambang and Syamtinningrum, Maeka Dita Puspa},
  title = {Analisis Defect Menggunakan Metode Failure Mode Effect Analysis (FMEA) pada Hasil Inspeksi Coating Material Tubing 3.5 Inch di Warehouse PT. X},
  journal = {Industrika : Jurnal Ilmiah Teknik Industri},
  year = {2026},
  volume = {10},
  number = {4},
  pages = {1077--1087},
  doi = {10.37090/b43t2s43}
}
Kostenlos starten →