EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Enhancing Heat Treatment Learning for Mechanical Engineering Students: A Comparative Study of Corrosion Inhibitor Effectiveness on Aluminium Protection

Saifuddin Karim, Yayi Febdia Pradani, Danang Yugo Pratomo, Imam Muhtarom, Tamara Rahma Widowati, Dian Julianto Wahyudi, Amelia Dini Wulandari, Prido Subekhi

Jurnal Teknik · 01.12.2025 · 23 (2) · 321-333

DOI: 10.37031/jt.v23i2.650 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik, online erschienen am 01.12.2025. Verfasst von Saifuddin Karim und 7 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Corrosion still remains a serious problem in the application of aluminum alloys, such as Aluminum 6061, which is one of the most widely used aluminum alloys in industries because of its high strength-to-weight ratio. However, the material degrades when exposed to aggressive environments, such as acidic, alkaline, or salty solutions, and the control of corrosion has been achieved with the use of synthetic chemical inhibitors, but the increasing concern of environmental and health risks has shifted attention to more eco-friendly alternatives. The present study aimed at evaluating the efficacy of three vegetable oils (coconut oil, palm oil, and soybean oil) as environmentally friendly corrosion inhibitors for Aluminum 6061, and the alloy coupons were subjected to three different corrosive solutions (hydrochloric acid, sodium hydroxide, and sodium chloride). A quantitative experimental procedure was employed to determine the corrosion rate through the measurement of the weight loss of aluminum coupons prior to and after the immersion, and the results showed that all three oils were able to reduce the corrosion rate when compared to the samples without any inhibitor. Among them, coconut oil gave the best protection, followed by soybean oil and palm oil, because the adsorption of the organic compounds and fatty acids in the oils onto the aluminum surface formed a thin layer that separated the metal and the corrosive environment. Consequently, the results also showed that the use of bio-based oils can be a promising alternative to synthetic corrosion inhibitors in industries that use aluminumbased materials.

Zitieren

APA

Karim, S., Pradani, Y. F., Pratomo, D. Y., Muhtarom, I., Widowati, T. R., Wahyudi, D. J., Wulandari, A. D., & Subekhi, P. (2025). Enhancing Heat Treatment Learning for Mechanical Engineering Students: A Comparative Study of Corrosion Inhibitor Effectiveness on Aluminium Protection. Jurnal Teknik, 23(2), 321-333. https://doi.org/10.37031/jt.v23i2.650

Vancouver

Karim S, Pradani YF, Pratomo DY, Muhtarom I, Widowati TR, Wahyudi DJ, et al. Enhancing Heat Treatment Learning for Mechanical Engineering Students: A Comparative Study of Corrosion Inhibitor Effectiveness on Aluminium Protection. Jurnal Teknik. 2025;23(2):321-333. doi:10.37031/jt.v23i2.650

BibTeX
@article{Karim2025,
  author = {Karim, Saifuddin and Pradani, Yayi Febdia and Pratomo, Danang Yugo and Muhtarom, Imam and Widowati, Tamara Rahma and Wahyudi, Dian Julianto and Wulandari, Amelia Dini and Subekhi, Prido},
  title = {Enhancing Heat Treatment Learning for Mechanical Engineering Students: A Comparative Study of Corrosion Inhibitor Effectiveness on Aluminium Protection},
  journal = {Jurnal Teknik},
  year = {2025},
  volume = {23},
  number = {2},
  pages = {321--333},
  doi = {10.37031/jt.v23i2.650}
}
Kostenlos starten →