EUVIMEDEUVIMED entdecken
Crossref

OPTIMIZING THERMO-POLYMER FLOW IN NON-NEWTONIAN RESERVOIRS: A CASPIAN BASIN CASE STUDY

Elshan Mammadli Elshan Mammadli

ETM Equipment Technologies Materials · 20.05.2026 · 181

DOI: 10.36962/etm36052026-21 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ETM Equipment Technologies Materials, online erschienen am 20.05.2026. Verfasst von Elshan Mammadli Elshan Mammadli.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In modern oil production practice, the development of high-viscosity reservoirs with non-Newtonian rheological properties is accompanied by significant technological challenges. In such reservoirs, the efficiency of conventional waterflooding methods is limited; therefore, the application of alternative and combined Enhanced Oil Recovery (EOR) technologies becomes increasingly relevant. In this study, the efficiency of the combined application of thermal methods (hot water or steam injection) and polymer flooding in non-Newtonian oil reservoirs has been evaluated based on diagnostic indicators. The synergistic mechanism has been analyzed in terms of the thermal effect reducing oil viscosity and improving flowability, while polymer injection decreases the mobility ratio and increases the sweep efficiency of the reservoir. The research results demonstrate that the application of thermo-polymer treatment significantly improves in-reservoir flow stability, mitigates early water breakthrough in high-permeability zones, and provides an average oil recovery increase potential of 7–15%. Comparative diagnostic evaluations indicate that this technology ensures an average 15–20% increase in the ultimate recovery factor compared to conventional waterflooding. The obtained results confirm the scientific and technological feasibility of combined thermal–polymer EOR technologies for reservoirs in the Caspian Basin. Keywords: Non-Newtonian oil, thermal EOR, polymer flooding, rheological diagnostics, Caspian Basin, recovery factor.

Zitieren

APA

Mammadli, E. M. E. (2026). OPTIMIZING THERMO-POLYMER FLOW IN NON-NEWTONIAN RESERVOIRS: A CASPIAN BASIN CASE STUDY. ETM Equipment Technologies Materials, 181. https://doi.org/10.36962/etm36052026-21

Vancouver

Mammadli EME. OPTIMIZING THERMO-POLYMER FLOW IN NON-NEWTONIAN RESERVOIRS: A CASPIAN BASIN CASE STUDY. ETM Equipment Technologies Materials. 2026:181. doi:10.36962/etm36052026-21

BibTeX
@article{Mammadli2026,
  author = {Mammadli, Elshan Mammadli Elshan},
  title = {OPTIMIZING THERMO-POLYMER FLOW IN NON-NEWTONIAN RESERVOIRS: A CASPIAN BASIN CASE STUDY},
  journal = {ETM Equipment Technologies Materials},
  year = {2026},
  pages = {181},
  doi = {10.36962/etm36052026-21}
}
Kostenlos starten →