EUVIMEDEUVIMED entdecken
Crossref

DESIGN ANALYSIS OF FISHING TOOLS USED IN WELL WORKOVERS

Amir Mustafaev Amir Mustafaev, Aqil Murtuzov Aqil Murtuzov

ETM Equipment Technologies Materials · 10.03.2026 · 190

DOI: 10.36962/etm33022026-22 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ETM Equipment Technologies Materials, online erschienen am 10.03.2026. Verfasst von Amir Mustafaev Amir Mustafaev und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present time in oil and gas fields, inactive form of wells is characterized. Known technologies are used for resuscitation of inactive wells. Such as lowering a column of pump-compressor pipes of a small diameter into a well or extracting trapped pipes from their wells with the help of new flexible pipes lowered into an emergency well [1, 2, 3, 4]. Disadvantages of these technologies is the impossibility of extracting the trapped flexible pipe from the well with the help of pump-compressor or flexible pipes lowered into the emergency new one due to the lack of displaced middle and surface equipment. To solve this problem, the author offers specific tasks. The use of the tap as a catch is possible due to the fact that the extraction of flexible pipes takes place when you grab it, and not when it breaks and falls. When the flexible pipe undergoes significant deformation and damage, when the appearance of cracks in the body is possible. When cutting the thread in the body of the pipe, further development and expansion of cracks is possible, leading to subsequent breakage of flexible pipes due to engagement with the tap. For the convenient use of the construction of the taps, a physical model of the process of forming a threaded connection, which ensures the reliability of fixing the tool in the body of the pipe and a specified load capacity during repair work, as well as a model of the process of surface hardening of the thread with microballs, has been developed. Suggested recommendations for improving the technological process of manufacturing a fishing tool. Keywords: idle well, flexible pipe, tap, fishing thread, residual tension, extraction.

Zitieren

APA

Mustafaev, A. M. A., & Murtuzov, A. M. A. (2026). DESIGN ANALYSIS OF FISHING TOOLS USED IN WELL WORKOVERS. ETM Equipment Technologies Materials, 190. https://doi.org/10.36962/etm33022026-22

Vancouver

Mustafaev AMA, Murtuzov AMA. DESIGN ANALYSIS OF FISHING TOOLS USED IN WELL WORKOVERS. ETM Equipment Technologies Materials. 2026:190. doi:10.36962/etm33022026-22

BibTeX
@article{Mustafaev2026,
  author = {Mustafaev, Amir Mustafaev Amir and Murtuzov, Aqil Murtuzov Aqil},
  title = {DESIGN ANALYSIS OF FISHING TOOLS USED IN WELL WORKOVERS},
  journal = {ETM Equipment Technologies Materials},
  year = {2026},
  pages = {190},
  doi = {10.36962/etm33022026-22}
}
Kostenlos starten →