Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part B: Torsion
Civil Engineering Beyond Limits · 2019
DOI: 10.36937/cebel.2020.002.002 ↗Kurz gefasst
Fachartikel in der Zeitschrift Civil Engineering Beyond Limits, 2019. Verfasst von Mahyar Maali. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 12 Literaturangaben. Gefördert von: Atatürk Üniversitesi.
Abstract (Originalsprache)
Torsional behaviors of col- formed steel beams are investigated for the webs which are filled by polypropylene. Four I and U profile beams filled with polypropylene were manufactured and tested. In the study, two specimens U100 and two specimens I100 profiles with 1.5 m length and 1.20 mm thickness and thin-walled cold-formed steel profiles were used. The aim of this study is to investigate the torsional behavior of the composite material formed by pouring the polymer material into the U and I profile molds after homogenous pulping. A total of two groups of samples will be obtained: empty cold-formed steel profiles and waste polymer. In this study, finely ground waste and/or raw PP (polypropylene) was used as filling material. The polypropylene is not only improved the torsional behavior strikingly; but also give a way on environmental profit for waste recycling.
Förderung
- Atatürk Üniversitesi
Zitieren
APA
Maali, M. (2019). Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part B: Torsion. Civil Engineering Beyond Limits. https://doi.org/10.36937/cebel.2020.002.002
Vancouver
Maali M. Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part B: Torsion. Civil Engineering Beyond Limits. 2019. doi:10.36937/cebel.2020.002.002
BibTeX
@article{Maali2019,
author = {Maali, Mahyar},
title = {Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part B: Torsion},
journal = {Civil Engineering Beyond Limits},
year = {2019},
doi = {10.36937/cebel.2020.002.002}
}
EUVIMED