EUVIMEDEUVIMED entdecken
Crossref

Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part A: Bending & Shear

Mahyar Maali

Civil Engineering Beyond Limits · 2019

DOI: 10.36937/cebel.2020.002.001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Civil Engineering Beyond Limits, 2019. Verfasst von Mahyar Maali. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 6 Literaturangaben. Gefördert von: Atatürk Üniversitesi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic waste is one of the most important problems that have occurred with modernization in the world and in our country. The use of plastics, which makes our daily life easier at many points, is also increasing day by day. The recycling and re-usability of these waste materials after use are of great importance and meaning when evaluated in terms of ecological order. In this study, finely ground waste polypropylene, which became waste, were poured into cold formed I100 and U100 steel profile molds. Carbon and glass fibers were used as reinforcement within the 16 samples. After melting, the behavior of I100and U100 molds filled with polypropylene will be observed after bending and shear tests on the samples. In the study, eight specimens for I100 and eight specimens for U100 profiles were produced. The main purpose of the cold formed steel in the production of I100 and U100 models is to enhance the bending and shear behavior of the models. As a result, the melted polypropylene within the cold formed I and U type models are presented a stunning performance.

Förderung

  • Atatürk Üniversitesi

Zitieren

APA

Maali, M. (2019). Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part A: Bending & Shear. Civil Engineering Beyond Limits. https://doi.org/10.36937/cebel.2020.002.001

Vancouver

Maali M. Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part A: Bending & Shear. Civil Engineering Beyond Limits. 2019. doi:10.36937/cebel.2020.002.001

BibTeX
@article{Maali2019,
  author = {Maali, Mahyar},
  title = {Behavior of Polypropylene Filled Cold Formed Steel Profiles – Part A: Bending & Shear},
  journal = {Civil Engineering Beyond Limits},
  year = {2019},
  doi = {10.36937/cebel.2020.002.001}
}
Kostenlos starten →