EUVIMEDEUVIMED entdecken
Crossref

Comparison of Abrasion Resistance and Surface Roughness of Foundry Patterns Produced from GG25 and GGG50 Grade Cast Iron

Ali Zeynalli

Brilliant Engineering · 27.07.2026 · 7 (4) · 1

DOI: 10.36937/ben.2026.41143 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Brilliant Engineering, online erschienen am 27.07.2026. Verfasst von Ali Zeynalli. Die Arbeit nennt 19 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pattern materials used in green sand patterning lines are continuously exposed to abrasive sand particles and repetitive mechanical loads, which can affect their dimensional stability and service life. In this study, the dimensional wear behavior of GG25 gray cast iron and GGG50 ductile cast iron pattern materials was investigated under industrial green sand patterning line conditions. Wear performance was evaluated using weight loss and dimensional changes after 16,794 patterning cycles, while surface roughness was assessed only for the initial machined condition. The results showed that both materials exhibited relatively similar dimensional wear behavior under the conditions studied. However, GG25 cast iron was observed to exhibit a lower measured mass loss and a relatively smoother surface texture. These observations suggest that material-dependent differences may affect wear performance during operation. Surface roughness was measured before patterning to characterize the initial machined surface finish. Furthermore, due to the limited number of cycles, variations in sample geometry, and the absence of repeated samples and direct microstructural characterization, the results should be interpreted cautiously. The findings provide a preliminary insight into the dimensional wear behavior of cast iron pattern materials under real industrial operating conditions and may form a basis for future studies involving larger sample sizes and more comprehensive material characterization.

Zitieren

APA

Zeynalli, A. (2026). Comparison of Abrasion Resistance and Surface Roughness of Foundry Patterns Produced from GG25 and GGG50 Grade Cast Iron. Brilliant Engineering, 7(4), 1. https://doi.org/10.36937/ben.2026.41143

Vancouver

Zeynalli A. Comparison of Abrasion Resistance and Surface Roughness of Foundry Patterns Produced from GG25 and GGG50 Grade Cast Iron. Brilliant Engineering. 2026;7(4):1. doi:10.36937/ben.2026.41143

BibTeX
@article{Zeynalli2026,
  author = {Zeynalli, Ali},
  title = {Comparison of Abrasion Resistance and Surface Roughness of Foundry Patterns Produced from GG25 and GGG50 Grade Cast Iron},
  journal = {Brilliant Engineering},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {1},
  doi = {10.36937/ben.2026.41143}
}
Kostenlos starten →