A review on defect suppression of melt growth ceramics prepared by laser-directed additive manufacturing
Materials Science in Additive Manufacturing · 18.11.2026 · 026310072
DOI: 10.36922/msam026310072 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science in Additive Manufacturing, online erschienen am 18.11.2026. Verfasst von Yunfei Huang und 8 weiteren Autor:innen.
Abstract (Originalsprache)
Melt growth ceramics (MGCs) exhibit exceptional high-temperature strength and microstructural stability near their melting points, positioning them as promising candidates for next-generation high-temperature structural materials intended for long-term service in extreme high-temperature oxidizing environments. Laser-directed additive manufacturing (LDAM), as an efficient, flexible, and environmentally friendly near-net-shaping technology, offers a novel approach to overcome the limitations of traditional MGC fabrication methods in terms of efficiency, quality, and achievable structural complexity. However, the rapid melting and solidification inherent in LDAM make MGCs highly prone to defect formation, which severely hinders the advancement of LDAM of MGCs (MGCs-LDAM). Therefore, this paper systematically reviews the formation mechanisms of two common defects—pores and cracks—in MGCs-LDAM, and summarizes the research progress on defect suppression. Finally, future research directions and key scientific challenges in this field are discussed. It is emphasized that quantitative defect characterization and in-depth analysis of formation mechanisms represent the primary current challenges. The development of innovative processing technologies is the key to overcoming the existing bottlenecks and promoting the development and application of MGCs-LDAM.
Zitieren
APA
Huang, Y., Li, Q., Luo, J., Zhao, D., Tao, N., Wang, J., Yang, Y., Long, Y., & Wei, W. (2026). A review on defect suppression of melt growth ceramics prepared by laser-directed additive manufacturing. Materials Science in Additive Manufacturing, 0(0), 026310072. https://doi.org/10.36922/msam026310072
Vancouver
Huang Y, Li Q, Luo J, Zhao D, Tao N, Wang J, et al. A review on defect suppression of melt growth ceramics prepared by laser-directed additive manufacturing. Materials Science in Additive Manufacturing. 2026;0(0):026310072. doi:10.36922/msam026310072
BibTeX
@article{Huang2026,
author = {Huang, Yunfei and Li, Qi and Luo, Jin and Zhao, Dake and Tao, Nengru and Wang, Junkai and Yang, Yongyun and Long, Yu and Wei, Wei},
title = {A review on defect suppression of melt growth ceramics prepared by laser-directed additive manufacturing},
journal = {Materials Science in Additive Manufacturing},
year = {2026},
volume = {0},
number = {0},
pages = {026310072},
doi = {10.36922/msam026310072}
}
EUVIMED