Study on the printing stability of Invar 36 alloy under different process parameter conditions in gas metal arc additive manufacturing
Materials Science in Additive Manufacturing · 24.09.2025 · 4 (4) · 025220046
DOI: 10.36922/msam025220046 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science in Additive Manufacturing, online erschienen am 24.09.2025. Verfasst von Giulio Mattera* und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref).
Abstract (Originalsprache)
Invar 36, a nickel–iron alloy distinguished by its low coefficient of thermal expansion, is a material of significant interest for high-precision applications in aerospace, moulds used in composite material fabrication processes and metrology. This work investigates the stability of depositing Invar 36 through gas metal arc additive manufacturing (GMA-AM), also known as wire arc additive manufacturing, with a focus on identifying process conditions, in a standard gas metal arc welding (GMAW) process, that promote consistent and defect-minimised builds. A series of experiments was conducted to assess the effects of key process parameters – including wire feed speed, welding speed and arc voltage – on deposition stability. Stability was evaluated through geometrical consistency of the deposited walls, arc behaviour and visual inspection of process-induced anomalies such as spatter and lack of fusion. This study presents a novel methodology to quantitatively assess the stability of the GMA-AM process, along with the construction of a process map specifically tailored for the Invar 36 alloy. The insights gained contribute to advancing the understanding of wire-based additive manufacturing of Invar 36, which is still understudied, and provide a foundation for further investigations into its mechanical performance and microstructural evolution under optimised process parameter conditions.
Zitieren
APA
Mattera*, G., Manoli, E., & Nele, L. (2025). Study on the printing stability of Invar 36 alloy under different process parameter conditions in gas metal arc additive manufacturing. Materials Science in Additive Manufacturing, 4(4), 025220046. https://doi.org/10.36922/msam025220046
Vancouver
Mattera* G, Manoli E, Nele L. Study on the printing stability of Invar 36 alloy under different process parameter conditions in gas metal arc additive manufacturing. Materials Science in Additive Manufacturing. 2025;4(4):025220046. doi:10.36922/msam025220046
BibTeX
@article{Mattera2025,
author = {Mattera*, Giulio and Manoli, Elena and Nele, Luigi},
title = {Study on the printing stability of Invar 36 alloy under different process parameter conditions in gas metal arc additive manufacturing},
journal = {Materials Science in Additive Manufacturing},
year = {2025},
volume = {4},
number = {4},
pages = {025220046},
doi = {10.36922/msam025220046}
}
EUVIMED