EUVIMEDEUVIMED entdecken
Crossref

Forming quality control of Laser Powder Bed Fusion GH3536 alloy: Surface quality, defects, and microstructure

Zhenyu Niu, Junfeng Zhang, Fenggang Liu, Fencheng Liu, Qifan You, Lixin Liu, Xuehao Gao, Jingyu Xu, Guangsai Zou, Hao Qiu, Shuitao Zhou

Materials Science in Additive Manufacturing · 20.08.2025 · 4 (4) · 025220042

DOI: 10.36922/msam025220042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science in Additive Manufacturing, online erschienen am 20.08.2025. Verfasst von Zhenyu Niu und 10 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of volume energy density (VED) on surface quality, density, defects, and microstructure of laser powder bed fusion (L-PBF) GH3536 alloy. Specimens fabricated below 80 J/mm3 exhibit lack-of-fusion pores on surfaces and internally, with pore density decreasing but crack initiation occurring as VED increases. Density consistently exceeds 99.5%, peaking at 99.85% (VED = 167 J/mm3). Excessive VED (208 J/mm3) induces surface warping, reduces cracking, but increases pore size/quantity, causing marginal density reduction. Lack-of-fusion defects nucleate microcracks distributed in layer bands; cracks propagate along high-angle grain boundaries following grain growth directions with significant localized stress. Higher VED increases melt pool overlap rate (70.49% at 208 J/mm3) and aspect ratio (width/depth = 6.9), while reducing cooling rates to 1.2 × 105 K/s.

Zitieren

APA

Niu, Z., Zhang, J., Liu, F., Liu, F., You, Q., Liu, L., Gao, X., Xu, J., Zou, G., Qiu, H., & Zhou, S. (2025). Forming quality control of Laser Powder Bed Fusion GH3536 alloy: Surface quality, defects, and microstructure. Materials Science in Additive Manufacturing, 4(4), 025220042. https://doi.org/10.36922/msam025220042

Vancouver

Niu Z, Zhang J, Liu F, Liu F, You Q, Liu L, et al. Forming quality control of Laser Powder Bed Fusion GH3536 alloy: Surface quality, defects, and microstructure. Materials Science in Additive Manufacturing. 2025;4(4):025220042. doi:10.36922/msam025220042

BibTeX
@article{Niu2025,
  author = {Niu, Zhenyu and Zhang, Junfeng and Liu, Fenggang and Liu, Fencheng and You, Qifan and Liu, Lixin and Gao, Xuehao and Xu, Jingyu and Zou, Guangsai and Qiu, Hao and Zhou, Shuitao},
  title = {Forming quality control of Laser Powder Bed Fusion GH3536 alloy: Surface quality, defects, and microstructure},
  journal = {Materials Science in Additive Manufacturing},
  year = {2025},
  volume = {4},
  number = {4},
  pages = {025220042},
  doi = {10.36922/msam025220042}
}
Kostenlos starten →