EUVIMEDEUVIMED entdecken
Crossref

Porosity and density measurement of additively manufactured components: A comparative analysis of measurement methods across processes and materials

Erik Westphal, Hermann Seitz

Materials Science in Additive Manufacturing · 07.05.2025 · 4 (2) · 025090010

DOI: 10.36922/msam025090010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science in Additive Manufacturing, online erschienen am 07.05.2025. Verfasst von Erik Westphal und 1 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Part density and part porosity are important parameters for additively manufactured (AM) components, as they significantly influence mechanical properties and indicate printing process’s quality. Various measurement methods are available such as gas pycnometry, gravimetric density measurements (Archimedes’ principle), and micrograph analyses. This study compared these methods by analyzing test specimens made from different materials using diverse AM processes. AM components made of metal, ceramic, and plastic as well as composites were analyzed with regard to part density and porosity. The results provided new findings on part density and porosity in AM processes and materials. Furthermore, they demonstrated the suitability of the employed measurement methods for certain purposes. In this context, it is always important to distinguish between the determination of true and apparent density. Gas pycnometry is best suited for determining the true density and enables the most accurate density measurement. Gravimetric measurement according to Archimedes’ principle is generally best suited for determining the apparent density, which is more relevant for characterizing the technical properties of AM components. Micrograph analyses are the only investigated method that shows the position of the pores in the component. However, the method generally only allows statements to be made in the sectional plane under consideration. In addition, gas pycnometry is preferable for very dense AM components and the Archimedes method for porous parts. Finally, the results can be generalized and recommendations for measuring porosity and density can be concluded for other AM processes.

Zitieren

APA

Westphal, E., & Seitz, H. (2025). Porosity and density measurement of additively manufactured components: A comparative analysis of measurement methods across processes and materials. Materials Science in Additive Manufacturing, 4(2), 025090010. https://doi.org/10.36922/msam025090010

Vancouver

Westphal E, Seitz H. Porosity and density measurement of additively manufactured components: A comparative analysis of measurement methods across processes and materials. Materials Science in Additive Manufacturing. 2025;4(2):025090010. doi:10.36922/msam025090010

BibTeX
@article{Westphal2025,
  author = {Westphal, Erik and Seitz, Hermann},
  title = {Porosity and density measurement of additively manufactured components: A comparative analysis of measurement methods across processes and materials},
  journal = {Materials Science in Additive Manufacturing},
  year = {2025},
  volume = {4},
  number = {2},
  pages = {025090010},
  doi = {10.36922/msam025090010}
}
Kostenlos starten →