EUVIMEDEUVIMED entdecken
Crossref

Innovative design and compression performance of selective laser melting-printed tantalum artificial vertebral bodies

Yutao Zhang, Wurikaixi Aiyiti, Jintao Li, Yong Huang, Xiaohong Dong

International Journal of Bioprinting · 16.05.2025 · 11 (4) · 165

DOI: 10.36922/ijb025150133 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 16.05.2025. Verfasst von Yutao Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tantalum (Ta) holds considerable potential for clinical applications in artificial vertebral bodies (AVBs) owing to its excellent biocompatibility. A novel Ta AVB structure was engineered by combining thin-walled structure topology optimization with lattice structure filling design methods. Three types of Ta AVBs—designated as AVB-1, AVB-2, and AVB-3—were fabricated using selective laser melting. The influence of sidewall curvature on the mechanical properties and deformation behavior of AVBs was investigated through compression tests and finite element analysis. The elastic modulus and yield strength of the Ta lattice structures ranged from 1.75 to 3.21 GPa and 31 to 65 MPa, respectively. Incorporating topologically thin walls enhanced the elastic modulus and yield strength by factors of 2.26–3.77 and 3–3.62, respectively. A decrease in sidewall curvature was associated with an increase in both elastic modulus and yield strength of the AVBs. Specifically, as the sidewall curvature decreased from 0.027 to 0 mm−1, the elastic modulus and yield strength increased by factors of 2.76 and 2.19, respectively. The yield strengths of the AVBs were comparable to those of human cortical bone. Among the three designs, AVB-2 exhibited the highest yield-strength-to-elastic-modulus ratio (0.029), compared to AVB-1 and AVB-3 (0.024 and 0.019, respectively), suggesting that the optimal sidewall curvature is 0.014 mm−1. AVB-2 effectively mitigated the stress shielding effect while maximizing the load-bearing capacity, indicating its significant potential for clinical applications.  

Zitieren

APA

Zhang, Y., Aiyiti, W., Li, J., Huang, Y., & Dong, X. (2025). Innovative design and compression performance of selective laser melting-printed tantalum artificial vertebral bodies. International Journal of Bioprinting, 11(4), 165. https://doi.org/10.36922/ijb025150133

Vancouver

Zhang Y, Aiyiti W, Li J, Huang Y, Dong X. Innovative design and compression performance of selective laser melting-printed tantalum artificial vertebral bodies. International Journal of Bioprinting. 2025;11(4):165. doi:10.36922/ijb025150133

BibTeX
@article{Zhang2025,
  author = {Zhang, Yutao and Aiyiti, Wurikaixi and Li, Jintao and Huang, Yong and Dong, Xiaohong},
  title = {Innovative design and compression performance of selective laser melting-printed tantalum artificial vertebral bodies},
  journal = {International Journal of Bioprinting},
  year = {2025},
  volume = {11},
  number = {4},
  pages = {165},
  doi = {10.36922/ijb025150133}
}
Kostenlos starten →