Machine learning-generated compression modulus database for 3D printing of gelatin methacryloyl
International Journal of Bioprinting · 20.09.2024 · 10 (5) · 3814
DOI: 10.36922/ijb.3814 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 20.09.2024. Verfasst von Shiue-Luen Chen und 8 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref).
Abstract (Originalsprache)
3D bioprinting enables the fabrication of printable tissues, including those for neural, cartilage, and skin repair. The mechanical properties, especially stiffness, of 3D-bioprinted scaffolds are crucial for modulating cell adhesion, growth, migration, and differentiation. The stiffness of a scaffold can be adjusted post-printing by modifying the hydrogel concentration, crosslinker concentration, light intensity during photocrosslinking, and duration of crosslinking. The optimization of these conditions to produce the desired scaffold stiffness for a particular cell type or application is a time-consuming and rigorous process. This study developed an innovative approach to predict the compression modulus of 3D-printed gelatin methacryloyl (GelMA) scaffolds using the Bayesian optimization (BO) algorithm. Through just 10 iterations (75 experimental data points), the model was able to predict > 13,000 possible compression modulus values in a search space comprising four independent variables (GelMA concentration, crosslinker concentration, ultraviolet light [UV] distance, and UV exposure time). This approach can be utilized in other photocrosslinkable bioinks for 3D printing that have a myriad of pre- or post-printing parameters that can affect scaffold stiffness.
Zitieren
APA
Chen, S., Senadeera, M., Ruberu, K., Chung, J., Rana, S., Venkatesh, S., Chen, C., Chen, G., & Wallace, G. (2024). Machine learning-generated compression modulus database for 3D printing of gelatin methacryloyl. International Journal of Bioprinting, 10(5), 3814. https://doi.org/10.36922/ijb.3814
Vancouver
Chen S, Senadeera M, Ruberu K, Chung J, Rana S, Venkatesh S, et al. Machine learning-generated compression modulus database for 3D printing of gelatin methacryloyl. International Journal of Bioprinting. 2024;10(5):3814. doi:10.36922/ijb.3814
BibTeX
@article{Chen2024,
author = {Chen, Shiue-Luen and Senadeera, Manisha and Ruberu, Kalani and Chung, Johnson and Rana, Santu and Venkatesh, Svetha and Chen, Chong-You and Chen, Guan-Yu and Wallace, Gordon},
title = {Machine learning-generated compression modulus database for 3D printing of gelatin methacryloyl},
journal = {International Journal of Bioprinting},
year = {2024},
volume = {10},
number = {5},
pages = {3814},
doi = {10.36922/ijb.3814}
}
EUVIMED