EUVIMEDEUVIMED entdecken
Crossref

Effects of laser-textured patterns on the mechanical strength and interfacial stress of additively manufactured carbon fiber-reinforced thermoplastic/aluminum alloy joints

Qige Li, Jianhui Su, Caiwang Tan, Cunlin Qin, Xiaohui Han, Cong Wang, Xiaohui Zhang, Gengxiang Yang, Bo Chen, Xiaoguo Song

Engineering Science in Additive Manufacturing · 2026

DOI: 10.36922/esam026110005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Science in Additive Manufacturing, 2026. Verfasst von Qige Li und 9 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As high-end manufacturing evolves toward lightweight, high-performance designs, integrated manufacturing technologies for heterogeneous materials have become critical in industries such as rail transportation and aerospace. However, the substantial differences between heterogeneous materials make it difficult to achieve reliable interfacial bonding during manufacturing. In this study, fused deposition modeling technology was used to directly print carbon fiber reinforced polyamide 6 (CF-PA6) filaments onto the surface of 6061 aluminum alloy, enabling the integrated fabrication of aluminum alloy/CF-PA6 composite structures. The influence of microstructure morphology on the joint was investigated. Grid-like and cross-shaped microstructures with identical surface areas were fabricated on the aluminum alloy surface by using a nanosecond pulsed laser. Furthermore, the cross-shaped microstructures were rotated at different angles to examine the effect of orientation on joint performance. Finite-element stress-field simulations were conducted to analyze and elucidate how microstructural design modulates fracture mechanisms in joints. The results show that the microstructures significantly increase the effective bonding area and enhance joint strength. Compared to the grid-like microstructure, the cross-shaped microstructure effectively inhibits crack propagation by reducing stress transfer between adjacent microstructural units. Rotating the cross-shaped microstructures provides additional control over stress transmission paths, leading to more uniform load distribution and consequently lower interfacial stresses. The joint with the cross-shaped microstructure rotated at 15° had the highest tensile-shear load of 2,635 N (corresponding to a tensile-shear strength of 6.6 MPa), representing a 198% improvement over the untreated state.

Zitieren

APA

Li, Q., Su, J., Tan, C., Qin, C., Han, X., Wang, C., Zhang, X., Yang, G., Chen, B., & Song, X. (2026). Effects of laser-textured patterns on the mechanical strength and interfacial stress of additively manufactured carbon fiber-reinforced thermoplastic/aluminum alloy joints. Engineering Science in Additive Manufacturing. https://doi.org/10.36922/esam026110005

Vancouver

Li Q, Su J, Tan C, Qin C, Han X, Wang C, et al. Effects of laser-textured patterns on the mechanical strength and interfacial stress of additively manufactured carbon fiber-reinforced thermoplastic/aluminum alloy joints. Engineering Science in Additive Manufacturing. 2026. doi:10.36922/esam026110005

BibTeX
@article{Li2026,
  author = {Li, Qige and Su, Jianhui and Tan, Caiwang and Qin, Cunlin and Han, Xiaohui and Wang, Cong and Zhang, Xiaohui and Yang, Gengxiang and Chen, Bo and Song, Xiaoguo},
  title = {Effects of laser-textured patterns on the mechanical strength and interfacial stress of additively manufactured carbon fiber-reinforced thermoplastic/aluminum alloy joints},
  journal = {Engineering Science in Additive Manufacturing},
  year = {2026},
  doi = {10.36922/esam026110005}
}
Kostenlos starten →