Why semiconductor additive manufacturing is challenging—and what comes next
Engineering Science in Additive Manufacturing · 26.03.2026 · 2 (1) · 026060003
DOI: 10.36922/esam026060003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Science in Additive Manufacturing, online erschienen am 26.03.2026. Verfasst von Ali Ghasemi und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Semiconductors underpin modern electronics, optoelectronics, sensing, and energy technologies, yet their manufacturing remains dominated by centralized, tool-intensive, and largely planar process flows. Additive manufacturing (AM) offers a complementary pathway that can reduce material waste, accelerate prototyping, and unlock three-dimensional (3D) semiconductor architectures that are difficult to realize using conventional fabrication. However, AM of semiconductors is still in its infancy and has been demonstrated for only a limited set of materials and processes. This perspective synthesizes the current landscape of semiconductor AM by compiling reported 3D-printable semiconductor systems and mapping them to the corresponding AM techniques, including laser powder bed fusion, selective laser sintering, gas-phase reactive AM, inkjet printing, electrohydrodynamic redox printing, two-photon lithography, aerosol jet printing, extrusion-based AM, and laser-directed energy deposition. The key process-specific barriers are critically discussed—spanning feedstock limitations, densification and cracking, stoichiometry control and volatilization, texture and compositional heterogeneity, post-processing burdens, contamination, and scalability. On this basis, a length-scale–guided roadmap is proposed: laser powder bed fusion is positioned as the most promising route for cm–mm thermoelectric architectures, with advances in substrate/feedstock design, atmosphere control, and microstructure/defect engineering; ink-based and reactive approaches are highlighted for sub-mm to micro-scale functional devices through improved ink chemistry, 3D buildup, and multi-material integration; and electrohydrodynamic redox printing/two-photon lithography are identified as leading candidates for sub-micron to nanoscale fabrication, where material diversification, low-temperature conversion, residue mitigation, and hybrid integration with conventional microfabrication are essential. Collectively, this perspective clarifies terminology, consolidates the emerging evidence base, and outlines research priorities required to transition semiconductor AM from proof-of-concept demonstrations toward robust, application-relevant device manufacturing.
Zitieren
APA
Ghasemi, A., & Sing, S. L. (2026). Why semiconductor additive manufacturing is challenging—and what comes next. Engineering Science in Additive Manufacturing, 2(1), 026060003. https://doi.org/10.36922/esam026060003
Vancouver
Ghasemi A, Sing SL. Why semiconductor additive manufacturing is challenging—and what comes next. Engineering Science in Additive Manufacturing. 2026;2(1):026060003. doi:10.36922/esam026060003
BibTeX
@article{Ghasemi2026,
author = {Ghasemi, Ali and Sing, Swee Leong},
title = {Why semiconductor additive manufacturing is challenging—and what comes next},
journal = {Engineering Science in Additive Manufacturing},
year = {2026},
volume = {2},
number = {1},
pages = {026060003},
doi = {10.36922/esam026060003}
}
EUVIMED